Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Find that noise part2

Thread Tools
 
Search this Thread
 
Old 08-22-2009, 11:27 PM
  #1  
Junior Member
Thread Starter
 
chaser's Avatar
 
Join Date: May 2009
Location: Mississauga
Posts: 122
Default Find that noise part2

Okay so the hunt continues. I've taken apart the interior panels around the whole trunk and secured any loose items that may cause a noise. Still there. Also taken apart the hatch panels and saw nothing.

I'm going to be removing the rear bumper/rear filler piece and tail lights tomorrow. Hopefully I can finally pinpoint it as I think it could also be the actual hatch glass not fully sealed and moves around during bumps.

Question. Any diy or guide on how to remove the rear bumper and rear panel filler piece between bumper and tail lights?
chaser is offline  
Old 08-23-2009, 07:09 PM
  #2  
There's plenty to do outside my room but I choose not to!
iTrader: (5)
 
Spike's Avatar
 
Join Date: Apr 2009
Location: Burlington
Posts: 5,142
Default

Well for the bumper there should be a screw or bolt inside the rear wheel well that holds it there, plus there will be some bolts under the car, and a few screws under the filler panel.
Spike is offline  
Old 08-23-2009, 07:57 PM
  #3  
Junior Member
Thread Starter
 
chaser's Avatar
 
Join Date: May 2009
Location: Mississauga
Posts: 122
Default

Thanks dude but I actually got it this morning. Once the taillights are off, 6 10mm bolts hold the filler panel and it pops out. It then exposes the bumper cover bolts.

Anyway the noise is still there, might have to replace the whole hatch trunk
chaser is offline  
Old 08-24-2009, 08:16 PM
  #4  
n00b
 
maxboost5's Avatar
 
Join Date: Aug 2009
Location: GTA
Posts: 5
Default

What kind of noise and what year integra? I think DA's have a problem with the hatch latch rattling. But this is more of a metallic sound. Adjust the rubber stops or put a piece of tape on the latch.
maxboost5 is offline  
Old 08-25-2009, 04:43 PM
  #5  
Junior Member
Thread Starter
 
chaser's Avatar
 
Join Date: May 2009
Location: Mississauga
Posts: 122
Default

I wish it was as easy as that. It is a 98 Gsr, it's hard to explain but it's something loose, knocking noise. Anyone know how to remove the hatch shocks?
chaser is offline  
Old 08-27-2009, 12:28 PM
  #6  
Junior Member
Thread Starter
 
chaser's Avatar
 
Join Date: May 2009
Location: Mississauga
Posts: 122
Default

Originally Posted by maxboost5
What kind of noise and what year integra? I think DA's have a problem with the hatch latch rattling. But this is more of a metallic sound. Adjust the rubber stops or put a piece of tape on the latch.
I think this may have solved my problem. I put electrice tape around the metal latch and it seemed to reduce or stop the noise. 2 successful short distance drives without the noise so far. Ill be so happy if this was the problem.
chaser is offline  




All times are GMT -5. The time now is 07:09 PM.