what are the exact differences between the 95-95 civic and the 94-01 integra axlebacks dimensionally?

 

depends which civic and integra? 2dr vs 3dr vs HB

I know for sure the Integra Coupe/3dr =/= Civic Hatchback we tried putting Fuzzy's on putt putt.. it stuck out like sore thumb.

 

I'm not exactly sure, but I know the b-pipe's work.

 

hatchbacks and coupes respectively.

so was it the bend or was it the hangers that were off?

 

I didn't end up using the axel-back, but I believe it's the hangers. I know civic guys put itr exhaust on there, by modifiying the hangers.

I'm not sure how far the tip sticks out though.

 

Call Bryan

 

the hangers fit fine, the difference in the axle backs is the straight piping length from the back of the canister to the bend in the over axle part. In order to put a integra axle back onto a civic you have to shorten the piping and cut the tip. So instead you need to extend the piping if you want to use a civic muffler on your integra. However this is regarding hb's only, I know coupes have longer piping at the axleback and i think they are similar length to integra. might actually bolt right up.