DIY 4 Body work???
 

does anyone have a DIY for body work im planning on doing mine where its minor just to cut down on a little bit of the cost....
thanks guys any help is always appreciated!:)

i guess thats a negative? :(

http://www.team-integra.net/sections...les.asp?Show=6

team integra has some DIYs, toronto integras don't have any.. i think toronto civic club has some as well

thank you!:)

You can buy yourself one of those bondo all in one body repair kits and it has all the instructions you need. When I was looking for pointers I just googled "DIY car body" or something along those lines.

where exactly do you need to repair?

diy bodywork? bondo? goodluck

umm i have rust...mosly where the moldings are some on the pillar by the windsheild umm on the roof by the windsheild and a little on the quarter panel

if you have some where the moldings are, the holes they mount to are rotted. it'll have to be cut out and new metal will have to be welded in. to get the rust around the windshield, you'll have to pull it.

+1 on getting it done right with new metal welded in. save up for a proper job

+2, getting it done right is always best if you don't want to see rust come back next season. I myself am cheap.

well it really depends on how the owner sees the car and how long they are planning on keeping it. For keeps = pay a shop, For Beater = DIY

lol ya....im pretty much driving my car into the ground i just want it ...kinda decent :P

if you are.. then do it once... do it right. pay the extra coin and get it done at the bodyshop.... which reminds me.. i cant wait to get mine back :D

ya see i dont wanna put alot of money into my car lol its really not worth it i just want it to look half decent...i plan on getting something better i just want to cover the rust

Then just leave it as is, sadly sometimes rust looks a heck lot better then half ass bondo jobs.

as long as u have some idea how to do it you'll be ok, i did the rear quarter panels on my metro and so far they're lookin good (never done it before), just nervous to paint now...

+1 on cutting it out if its bad and putting new metal, i did that and it's worked pretty good so far..

post pics if you decide to DIY...ill post some of mine in a few days maybe

Good Luck!

thanx guys! ill probably look into it a bit more i dont want it to look "half assed" but i do wanna do it myself so im going to have to do some research lol