Clutch Squeeks
 

I am having this wierd problem, I changed my entire clutch this summer with OEM honda parts. Recently I've noticed that my clutch is making a squeeking sounds when ever there is no pressure on the clutch, but once I apply even the slightest pressure to the clutch padle it goes away... any ideas?

John
thanks for helping

clutch master cylinder

or

clutch slave cylinder

I replaced both not too long ago, I was thinking it was the clutch cable, rod, "don't know what its called"

when you press the cluth, where exactly do you hear the noise from? you may need two people to do this because it echoes like crazy in the engine bay and its hard ti diagnose.

could also be your clutch throw out bearing if your hearing the noise within the tranny.

well after some research on T.I, its either the throw out bearing which I am hoping that it isn't, or the clutch fork which needs greasing.. But the strange part is that people are getting when they engang the clutch, but I only get it when I dont engang the clutch, even with the slightest pressure on the clutch peddle it goes away. Wierd..

The slave cylinder is sqeaking.. Most of the time this is the problem. In front of the tranny there is a rubber boot peel that boot back and put some High temp grease on the rod. This should get rid of the noise.

If not then it's something else bigger.

its the clutch bearing. I have the same problem. get a new bearing.

you got to tell us where the sound is coming from then we can tell you what it is

I tried to check where the noise is coming from, it seems like its coming from the front of the car, more towards the engine.

D, try this and see if it'll work for you.

https://www.torontointegras.ca/forum...=clutch+squeek

Well I went to the Machanic to install my new shocks, while I was there I asked him my clutch is making a squeeking noise. After he looked around he knew exactly where to go, it turns out that the FORK in the Slave Cylinder is vibrating due to the Clutch Cylinder. He bleeded my slave cylinder and the squeeking went away, but its back again today :( Should I try greasing it?

yeah it should come back, that thing is known to squeek. try the instruction in that link i sent u..wait doesn't your car have a cable tranny?

Nope, mine is the DC2 GSR

ahhh im getting u confused with "tegatron"...just try that link i posted.