Clutch Squeak Solution
 

When I pressed my cluch, I heard a weird squeak. First i thought it was coming from my pedal greased that, the noise was still there. It began to be so loud i could hear it while shifting. I figured it was coming from my engine bay, did some research and found out how to remove it. Thanks to Fuzzy for his car is used in this article.
MODS, may want to sticky this for current and future memebers.

Hope this helps, supposedly this is a common problem in Honda's

Product required:
Brake caliper/slider pin grease
(can be easily found at crappy tire)

Take the Boot off from the tranny and slave cylinder, push it to the left as much as possible.
https://img.photobucket.com/albums/v...re015Rcopy.jpg

Now you want to take off this boot and push that as far as you can to the left to expose the rod underneath.

https://img.photobucket.com/albums/v...re016Rcopy.jpg

Now take your caliper pin grease

https://img.photobucket.com/albums/v...icture017R.jpg

Now apply it to the rod of the slave cylinder
https://img.photobucket.com/albums/v...icture019R.jpg

Now replace your all your boots and pump your clutch a couple times to get it through, and apply more if needed. Hopefully your squeak will be gone.

gonna try this.. good stuff mike.

Did you have to do this from underneath the car?

Nope

Awsome!!! I've been having that dreaded squeek when pressing the clutch for so long!!! I"m a gonna go try this, thanks for posting!

Add to DIY section

thanx for the tips i was gonna take my car to the garage...will try

the pics don't work for meeee??

look out for the rebuild.....coming soon.

picture no workie

can somebody repost the pictures? i have the issues now. thanx

:werd:

pix no workie :cry:

pics still don't work :S

Pics still not be working..