carbon fibre hood keylock installation help plz!
#1
carbon fibre hood keylock installation help plz!
has anyone ever installed keylock style hoodpins on their integra? if you have..do you guys have any tips...such as where you install the bolt? into the rad support or what? any tips would hlep!
#4
There's plenty to do outside my room but I choose not to!
Join Date: Sep 2003
Location: Somewhere
Posts: 5,183
#7
yeah..i tried using google..but i don't think i'tll work. casue i got a mrgasket hoodlock..and i htink it'll sit too high...casue i put the pole into the rad support...but if i instal the locking part into the hood...when it locks into the pole..it's still too high. has anyone installed mrgasket on their integra?
#12
I dont think masking tape will help from cracking the hood,
if you drill,
use a fully charged battery, new or sharp bit and do mask the area of where you will be drilling incase the bit wants to wonder,
the hood pins will be locked into the top rad support
if you drill,
use a fully charged battery, new or sharp bit and do mask the area of where you will be drilling incase the bit wants to wonder,
the hood pins will be locked into the top rad support
#17
ya i did today they are a pain in the ***.. get some cotter pin hood pin style. I put mine in today bro and they are temp they lock but if i unlock them then i got to press down on my hood and get them to lock. I wouldnt use them get some of the hood pins like the pin comes through like cotter pin style. They are easy to install.
#19
ya i did today they are a pain in the ***.. get some cotter pin hood pin style. I put mine in today bro and they are temp they lock but if i unlock them then i got to press down on my hood and get them to lock. I wouldnt use them get some of the hood pins like the pin comes through like cotter pin style. They are easy to install.
i like the keylock style...if ou can..take some pics of where on the hood you isntalled it and where on the rad support you bolted it in? cause i can't seem to find a spot with enough clearance..since the lock and locking bolt thing tkae up so much height. knwo what i mean?
#20
I got em on my car! a pain 2 install i tell ya! ur hole is gonna be quite large. hardest part of installing it is compensating for the angle of the hood! so install the bolts first and then have a guide mark to where u drill. U gonna have 2 keep closing in ur hood to see if it dead on to latch with the keylock! Good luck bro! Oh BTW! If u have a cheap hood like I did, good luck securing the washer lock part on the hood! LOL!
#21
but where did you install the bolts? in which holes? cause if i instal it in the rad support hole...it sticks up 1 inch...and then with the keylock in place..thers not enough of clearance when you close the hood. kwno waht i mean?
Thread
Thread Starter
Forum
Replies
Last Post
nightstick
Integra Parts For Sale
4
04-24-2007 04:27 AM
BIDZGSR
Integra Parts For Sale
7
04-16-2007 10:43 PM