Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Car Shaking

Thread Tools
 
Search this Thread
 
Old Jul 28, 2008 | 04:09 PM
  #2  
DJINFERNO806's Avatar
Senior Member
 
Joined: Nov 2006
Posts: 2,084
From: Mississauga
Default

I'm just going to assume possibly motor mounts? But could also be axles as it seems to only shake under power transfer from transmission and goes away when in neutral.
Old Jul 28, 2008 | 04:10 PM
  #3  
acura_integra's Avatar
n00b
 
Joined: Nov 2006
Posts: 82
From: Waterloo
Default

possibly motor or tranny mounts or bushings

jack your car up and check your wheel for play (tie rod ends, wheel bearings)


that is just off the top of my head, I would do some searching on here or TI and see what they have to say, if you need the car ASAP I would take it right to your mechanic, better safe than sorry.


Check my suggestions first though.


bah DJINFERNO806 you beat me to it.

Good luck,

Chris

Last edited by acura_integra; Jul 28, 2008 at 04:11 PM. Reason: lol
Old Jul 28, 2008 | 04:28 PM
  #4  
Buff4Prez Yo's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (2)
 
Joined: Aug 2003
Posts: 8,164
From: The Hammer!
Default

Wheel bearing. same thing happened to me 2 years ago. it doesn't shake when you start your trip but the further you are in to it, the shake gets worse, right?
Old Jul 28, 2008 | 04:38 PM
  #5  
jugtoor's Avatar
Junior Member
 
Joined: Oct 2005
Posts: 463
From: Mississauga
Default

could be your diff or an axle my car was doing the same thing recently and then my axle popped out of my diff and would not stay put afterwords. So i threw in a new diff and a new axle and its drives perfect.
Old Jul 28, 2008 | 07:12 PM
  #6  
Nawaaz's Avatar
Time to become a Premier Member!
 
Joined: Mar 2007
Posts: 3,681
From: London, ON
Default

I was thinking wheel bearing also, did u end up finding out what it was?
Old Jul 28, 2008 | 09:56 PM
  #8  
slvr_dc2's Avatar
Junior Member
 
Joined: Nov 2005
Posts: 296
Default

I doubt its the bearings cause the bearings would also be making an annoying loud sound as well!
Old Jul 28, 2008 | 10:14 PM
  #9  
3NE 2NR's Avatar
Member
 
Joined: Dec 2006
Posts: 959
From: Brown-Town
Default

Originally Posted by slvr_dc2
I doubt its the bearings cause the bearings would also be making an annoying loud sound as well!
Very true.!

i think it might the bushings in the stock traction bars that go from the control arms to the front subframe..!! just a thought
Old Jul 28, 2008 | 10:36 PM
  #10  
NOFEAR's Avatar
Senior Member
 
Joined: Mar 2008
Posts: 1,011
From: Sauga
Default

Originally Posted by -Azarro-
YES! absolutely right!

took it to my mechanic. couldnt find anything wrong. told me that it might be drive shaft but that got changed recently so thats not it for sure.

kk im going to look into that. thanks Mark. ill keep you guys updated
Had the same problem on my past DA, didn't bother fixing it cause I sold the car as it was but I knew it was that.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
TOP_DAWG
Integra Technical Questions and Tips
8
Aug 11, 2007 07:28 PM
MaFiAbOy
Integra Technical Questions and Tips
13
Nov 17, 2005 06:23 PM
MaFiAbOy
Integra Technical Questions and Tips
11
Nov 4, 2005 04:44 AM
AlvinHH
Integra Technical Questions and Tips
8
Jun 10, 2005 05:02 PM




All times are GMT -5. The time now is 12:42 AM.