cam install for B series
#2
http://www.c-speedracing.com/howto/caminstall/cam.php
Its super easy to do, just take your time, torque everything to the proper spec (20ft/lbs on the 12mm cam cap bolts, 130ft/lbs on the crank pulley bolt, 40ft/lbs on the tensioner bolt) and make you've got the timing set right before putting the timing belt on, and that you've got the proper amount of tension on the timing belt....too tight and it will whine when you rev it too loose and it will flop around.
Its super easy to do, just take your time, torque everything to the proper spec (20ft/lbs on the 12mm cam cap bolts, 130ft/lbs on the crank pulley bolt, 40ft/lbs on the tensioner bolt) and make you've got the timing set right before putting the timing belt on, and that you've got the proper amount of tension on the timing belt....too tight and it will whine when you rev it too loose and it will flop around.
#3
valve adjustment link? Thank you for that Zman...Appreciate it
EDIT***I just found that hot link area on C-Speed. Awesome... thanks
EDIT***I just found that hot link area on C-Speed. Awesome... thanks
Last edited by MaFiAbOy; 01-18-2007 at 12:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post