bolts and nuts
As we all know the local stealearship is quit expensive.. I will replace some bolts with a pretty strong grade. I have been searching and the specific bolts I am replacing are the lca to subframe bolts which i believe are 10x80 bolts. acura sells them under 15$ each... and on a hardware store 2$. The grade that everyone recommended was no less than class 8.8 but prefer grade 8/class 10.9.
to those who knows about these... i just need an ok or no and why. i searched and they seem to have the same strength as oem.
and yes i know oem is the way to go specially on suspension parts...
to those who knows about these... i just need an ok or no and why. i searched and they seem to have the same strength as oem.
and yes i know oem is the way to go specially on suspension parts...
i just went to my local auto supply store and picked up a set of auto grade lca bolts. cost less than ten bucks for all the control arm bolts plus they are in a black finish, not that bright brassy color of oem just bring in one of the old ones when you go an they should be able to match it up pretty good
I am almost sure that i know what David told you in the PM. The place you called do have those. I went there to get a few, they just pulled em out of the type r lca/strut they had. All 3 are the same, so it doesnt matter really. Just walk in and they will hook ya up
Thread
Thread Starter
Forum
Replies
Last Post
Bob
Pictures and Videos
31
Nov 23, 2006 10:22 PM






