kash

Well as the title states, my ABS light recently came on and I can't seem to figure out what the problem is. When I start the car, the ABS light turns off like it should, but once I start moving it comes back on within 5-10 seconds.

I searched the topic both here and on T-I, and was thinking of doing the paper clip test, but since the DIY said that the light should be flashing, I didn’t bother.

So far, I have topped up on brake fluid as well as checking the ABS reservoir, thinking it may be a quick fix, but I am still encountering the same problem.

Any help is appreciated,
Thanks!

p.s The car in question is a 94 gsr
http://www.team-integra.net/sections...?ArticleID=493 << Link to ABS paperclip diagnostic

KleenGiz'R

Seems like a dirty wheel sensor take them off and clean them up. I think you can find an article on team-integra.net

kash

Good idea, I'll give it a try and keep you all posted.

Keith

could be caused my low brake fluid, leaking because of low pads/rotor

nvm didnt read the full story

kash

Couldn't get the bolts out that hold in the sensor's. Since I didn't want to snap anymore I just stopped. Anyone have any tips on removing rusted stubborn bolts?