WTB Rear Tailight Gasket
#1
WTB Rear Tailight Gasket
Not Looking for Rear Tailight Gasket for 94-01 Integra... anymore... see below
Last edited by MechEng; 06-24-2010 at 09:08 AM.
#7
I didn't want my trunk full of water after the storm and considering the dealer is out of stock I did the following:
* Removed the light to expose the gasket.
* Cleaned around the gasket area
* Sprayed the gasket with Silicon spray (it was a bit dry so this gave it back some life)
* Cleaned the overspray and wiped around the gasket area again
* Applied a bead of outdoor silicone to the outer perimeter of the gasket
Not one drop of water in the trunk. The design doesn't seal the perimeter with a lip so the water will bead down into the outer perimeter of the gasket down into the holes and then into your trunk.
If your gasket is ripped or in rough shape, this will only help so much.
* Removed the light to expose the gasket.
* Cleaned around the gasket area
* Sprayed the gasket with Silicon spray (it was a bit dry so this gave it back some life)
* Cleaned the overspray and wiped around the gasket area again
* Applied a bead of outdoor silicone to the outer perimeter of the gasket
Not one drop of water in the trunk. The design doesn't seal the perimeter with a lip so the water will bead down into the outer perimeter of the gasket down into the holes and then into your trunk.
If your gasket is ripped or in rough shape, this will only help so much.
Thread
Thread Starter
Forum
Replies
Last Post