teg

Hey everyone, I am parting out my 4dr teg. I did body work to it when I first got it during the summer. Swapped a B18b into it with 160k on it for e-test and it passed in october. I needed a windshield in order to pass saftey but just recently my driver side doors front and rear were kicked in and windows broken. Sooo I dont feel like doing repairs and have decided to part it out.

Ill be posting pictures later on tonight. Everything is up for grabs except for the headlights and CAI.

Engine and tranny are pending...

I have few other parts that have not been mounted on the car, some are new, some are used. Ill post those when I post the pics.

Everything is BEST OFFER.
I will accept lowball offers on few things depending on what they are.
Everyone pays there own shipping

I really need this stuff gone as I have hugh speeding fine due in march

The car be sold as whole, just throw me an offer.

LIST OF PARTS FOR SALEnew part added '*')
-front and rear upper strut bars (no name) *sold*
-front and rear seats (grey)
-neuspeed front upper strut bar *sold*
-rear tokico struts
-90-91 OEM front lip
-92-93 OEM front lip
-(x2) 92-93 front bumper (green, white)
-passenger side doors front and rear
-(X2) B18A motor
-B18B head
-ractive 4-2-1 header
-B18A intake manifold
-B18A TB
-full set of mud flaps
-front mud flaps
-2dr tails
-(x2) 4dr tails
-K&N air filter 3" opening
-OEM air filter
-B18A cams and cam gears
-B18A block
-(x2) OEM LED spoilers (red, white)
-Huyame muffler 4" tip
-Alpine deck
-Kenwood deck
-OEM 94+ air intake piping
-(x2) bseries fuel rails
-B18B intake manifold wih TB, fuel rail and injectors
-5 speed hydo tranny
-bseries shift linkage with dual bend shifter
-90-93 OEM turn signals
-corner light
-94+ air intake piping
-b series power steering pump
-2 pair of steelies (need new rubber)
-2 OEM 90-93 integra rims (need new rubber)
-full set of rims (need new rubber)
-civic half rad
-rear filler piece(black)
-12" sub box
-nrg quick release (red)
-Datum 1 fron tow hook (red)
-euro HIDs (brand new, never installed)
-carbon fiber gas tank door (overlay)
-entire interior!!
-*B&M short shifter*
-*Skunk2 cam gears (blue and black)*
-*Pr3 pistons (brand new)*
-*piston rings (brand new)*
-*GSR centre console*
-*OEM clutch and pressure plate (brand new)*
-*B20 head and block w/intake mani, exhaust mani, TB, from a DA
-*momo wheel no centre cap 330mm*
...and anything else you can think of
(!!!ALL PRICES ARE OBO!!!)
Hit me up with what ever offer you like. I will not be under sold! lol

You can send me a pm, or send me and email at thehandthatfeeds_1@hotmail.com. Email would be best.

Thanks Wayne

CzA

I need a front left wheel baring and axle. I am extremely cheap as of now with my integra, as money is going elsewhere, so if yours is in ok condition ill swap it in to mine ( i know this is something you should buy new, not used, but at this moment, i don’t care, as long as its better than what i have). As i said, I am cheap( sorry money and I right now have other plans), but i won’t expect you to hand it to me for free, so if your willing to sell it to me, shoot me a price,and ill come pick it up.
thanks

cdub

i need a drivers side axle. not sure if you are packaging that with your engine and tranny deal but let me know.

db1

hey buddy call me 905 330 9012 i need parts!bounch of parts my name is jamal i live in oakville too!

teg

I understand where you are coming from. What is the most you are able to pay? Did you mean the driver side?

teg

If CzA does not need the drivers side axle its yours. Keep checking the thread to see whether he does or not.

Whats going on Jamal, I picked up that turbo off of you a little while back. What are you looking for?

db1

honestly i just need a bounch of small random stuff i went to B and D today but they didnt had some stuff but not all, call me whenever your free so i we can meet up!

CzA

YEa its the driver side Check Pm, also, i guess i should have aksed before requesting, your 92 axel / hub assembly, will that fit my 90 DA? I figured it would, but want to make sure.

Thanks.

teg

Yeah it should fit no problem.

teg

New parts added!!

db1

yo wayne call me tommorro before 3 if u can 905 330 9012

thusee

hey man how much for the pr3 pistons and rings

teg

$175 I can meet you half way.

thusee

alright sounds good i can do it like next week
just working on getting some cash together gota pick up a few other parts as well.

i can grab this next weekend right after pay day
and just making sure these will work in the b17 gsr block right? new to rebuilding so ya.

i might grab some more stuff as well just gota wait and see. so lets work something out

da9integra_jesse

90-93 OEM turn signal the fitment is different for 90's and 93's lemme noe if you got the 93's and howmuch you want for em

da9integra_jesse

416 877 7479

Burfy

iTrader: (2)

didnt you buy bvan's car? i need a bunch of stuff myself.. rear trailing arms, front left body panel, couple other random things.. i can pull everything myself if it'll knock off a couple bucks..

Burfy

iTrader: (2)

oh might be interested in the 4-2-1 mani and b20.. package deal?

teg

Honestly Im not 100% sure on whether or not the pistons would work on a GSR block. Im sure someone on here can give you an answer, when I can't. I`m new to rebuilding myself.
What ever you would like to grab of the teg just let me know and Ill get it all ready for yeah.
If you dont have the cash right now but you will. I can certainly hold on to it for you.
Email me with what you want or need.

I assume you mean the turn signals in the bumper for a 93, correct? Well I have clear signals if you would like them, $20.

I did buy Bvan`s car. I took what I needed and scrapped it. i.e. engine, tails.
If you want to give me a list of what you need/want Ill pull it all off myself.
Whether or not I take it all off or you do, the pice is unaffected.
I do not have ridiculous prices due to the fact that I need this stuff out of here, its taking up too much space. So pretty much I can assure you that you`ll get more bang fo your buck. lol
Send me an email and we`ll talk more from there, and hopefully get a working price put together that will interest you in buying the 4-2-1 header and B20 =]

Burfy

iTrader: (2)

could you email me some pics? i'll make you a complete list when i get home from school, im on my phone right now lol.. bburfoot@gmail.co(m) appreciate it!

teg

I can get you pics but probably not until saturday. Im having problems with my camera. As soon as I can ill send you those pics.

Burfy

iTrader: (2)

No problem, I emailed you..

Mr.$ub

ay what kind of HIDS(color temp.), what size and how much?

teg

They are a plug in and play HID kit. Bright white, I've never installed them. H4 is the size.
$120

thusee

consider the pistons and rings sold
ill take them
add me on msn we can talk bout the other stuff

thusee@live.com

xxBvanxxx

I sold my 4 door to him a week or 2 ago. Hes a good guy to deal with. Free Bump!

teg

Thanks Bvan, much appreciated!

Burfy

iTrader: (2)

Hey, couple things.. first is it a b20 B? and could I get the driver side seat? any thought into how much for everything yet? sorry to sound impatient but i'm itching to get working on my car lol..

xxBvanxxx

Question is the rear filler peice(black off a 2 door or a 4 door? 2 door right? also the condition of the civic rad and how much for the dual bend shifter itself? Can i get prices for all seperately adn then in a packaged deal? PM me or text me. 647 829 8104 in case u lost it.

thusee

hey bro
come online or email me the location you want me to come to tomorrow ill be leaving in the morning around 10am so i should b there between 1030 and 11
ill need your number
main intersection
if im not online email it

thanks
pistons, rings, civic shifter, b16 block

thusee

picked up the block and pistons great guy
bump...!!

Burfy

iTrader: (2)

Gotta make a big update to your f/s list after this weekend lol.. Thanks again, will be dealing with you again soon.. Great guy to deal with

CzA

He is definitely a great guy to do business with. The whole spindle assembly worked like a charm, thanks again.

teg

Happy I could help you guys out

thusee

update ur list bro i might need somethings later on

Azi

interested in the full set of rims. still got them?

turboda4dr

iTrader: (5)

great guy to deal with!!! would buy fron him again. thx wayne

bangdagears

great guy, strut brace works mint, trunk release cable still waitin on trade.

da9integra_jesse

i'll buy the nrg quik release and the hids depending on how much k it is.... how much you want for it??

Burfy

iTrader: (2)

hey wayne, just lettin u know the headers worked mint! got installed 2 weeks ago and what a difference.. havent put the b20 in yet though.. still waiting on warmer weather lol.. hope you got enough $$ for that fine haha.. hey if u have access to a coilover set for a db1 lemme know.. suspension's next on my list.. enjoy the free bump and thanks again!