B and D-series parts galore, b16 head, z6 head, cable trannies, etc etc
07-12-2008, 10:23 AM
#1
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
B and D-series parts galore, b16 head, z6 head, cable trannies, etc etc
Its time to clean out the basement of all the parts I don't need anymore.
All parts are located in Hamilton, but I am available to meet up somewhere if need be.
Please PM me or call 905-929-9677
Andrew
- 1st gen b16 head, includes valve cover, vtec solneoid, cams, all sensors (no intake manifold).....$300....will include an obd0 b16 dizzy for an additional $50.
- 1st gen b16 head, includes valve cover, vtec solenoid, cams, all sensors (no intake manifold), this head has been ported, has new valves and valve seals (10,000kms since rebuild), also has some aftermarket valve springs/retainers (not sure which brand), this head is mint and made 315whp on a boosted b16....$500....will include an obd0 b16 dizzy if you want it.
- Crane stage 2 cams....STILL FOR SALE (buyer flaked out)...$250
These cams are absolutely MINT, I have pictures if anyone is interested.
- Obd0 b-series vtec distributor....$100 (I have 2 of these)
- Obd0 "mugen" chipped PR3....$100
- DX cable tranny....$50
- Obd1 chipped p28....$150
- d16z6 cylinder head....SOLD
- SI cable tranny....SOLD
- d16y7 complete engine....SOLD
- b16 block with crank (pistons were junk, but I have the rods if you want them)....FREE (I have 2 of these)
Prices aren't set in stone, but lowballers will be ignored.
All parts are located in Hamilton, but I am available to meet up somewhere if need be.
Please PM me or call 905-929-9677
Andrew
- 1st gen b16 head, includes valve cover, vtec solneoid, cams, all sensors (no intake manifold).....$300....will include an obd0 b16 dizzy for an additional $50.
- 1st gen b16 head, includes valve cover, vtec solenoid, cams, all sensors (no intake manifold), this head has been ported, has new valves and valve seals (10,000kms since rebuild), also has some aftermarket valve springs/retainers (not sure which brand), this head is mint and made 315whp on a boosted b16....$500....will include an obd0 b16 dizzy if you want it.
- Crane stage 2 cams....STILL FOR SALE (buyer flaked out)...$250
These cams are absolutely MINT, I have pictures if anyone is interested.
- Obd0 b-series vtec distributor....$100 (I have 2 of these)
- Obd0 "mugen" chipped PR3....$100
- DX cable tranny....$50
- Obd1 chipped p28....$150
- d16z6 cylinder head....SOLD
- SI cable tranny....SOLD
- d16y7 complete engine....SOLD
- b16 block with crank (pistons were junk, but I have the rods if you want them)....FREE (I have 2 of these)
Prices aren't set in stone, but lowballers will be ignored.
Last edited by zman; 08-17-2008 at 09:39 AM.
07-13-2008, 10:27 PM
#2
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
d16y7 engine and one z6 head are SOLD
07-18-2008, 12:16 PM
#3
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
the other z6 head and SI cable tranny are SOLD
07-25-2008, 07:37 AM
#4
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
I also have a Civic Type R crank pulley (runs the alternator only, not compatible with p/s or a/c)....$75.
08-07-2008, 10:34 AM
#5
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
Crane cams are SOLD
Price drops on the rest.
Price drops on the rest.
08-17-2008, 09:39 AM
#6
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
CTR crank pulley is SOLD
08-17-2008, 09:59 AM
#7
Junior Member
Join Date: Mar 2007
Location: Hamilton
Posts: 138
bump for the drew
08-19-2008, 12:10 PM
#8
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
take the crane stg2 cams, built b16 head, obd0 b16 dizzy and chipped PR3 obd0 vtec ecu for $800....everything you need to bolt on and go.
take the crane stg2 cams, built b16 head and obd1 chipped p28 with my old n/a b16 custom tune for $850....can also add an obd0-obd1 ecu conversion harness for $50.
These cams in my old n/a b16 setup made 167.7whp with an AEBS intake manifold, 64mm throttle body and vibrant j-spec 4-2-1 header
priced to sell
take the crane stg2 cams, built b16 head and obd1 chipped p28 with my old n/a b16 custom tune for $850....can also add an obd0-obd1 ecu conversion harness for $50.
These cams in my old n/a b16 setup made 167.7whp with an AEBS intake manifold, 64mm throttle body and vibrant j-spec 4-2-1 header
priced to sell
08-20-2008, 09:19 AM
#10
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
sorry, i'm not taking pictures of the dizzy or ecu, i'm pretty sure you know what that looks like.
Here are some pictures of the cams (to show their mint mint condition).
Here are some pictures of the cams (to show their mint mint condition).
08-22-2008, 06:16 PM
#11
n00b
Join Date: Aug 2008
Location: kitchener
Posts: 12
did those cams passed emissions?
08-23-2008, 12:50 AM
#12
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
yes they did. I tuned my car myself....it even had a 2.5" exhaust, header, and SRI.
08-25-2008, 10:01 AM
#13
Member
Thread Starter
Join Date: Apr 2004
Location: Hamilton
Posts: 510
bump
Thread
Thread Starter
Forum
Replies
Last Post
BIDZGSR
Integra Parts For Sale
56
09-13-2008 11:39 PM
bartek_b
Integra Parts For Sale
10
04-14-2007 01:02 PM