1990 Integra RS coupe Shell FS
08-12-2008, 05:24 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
1990 Integra RS coupe Shell FS
Well i decided to let my car go. Timing belt snapped few days ago and i'm taking it as a sign and moving on. I'm going back to school anyways so don't need a car especially traveling to Ryerson downtown.
Anywho for sale is my 1990 Red DA. Everything is in the car including motor. Im not 100% if the valves are fine or not since the timing belt went so you might even get a perfect motor. Im selling as a whole shell for $400. Not really interested in parting out as i don't have the time and i don't want to see a piece of junk in pieces sitting in my driveway.
295,xxx Km's on car and about 150 ish on 2nd B18a1 according to last owner (ys1 tranny) Clutch still strong. Those of you on here who know me can vouch the motor ran perfect no problems until my belt snapped.
- 2.25 inch exhaust piping from cat back
- viper alarm system
- gs-r leather seats in front (6/10 condition)
- Momo course steering wheel (9/10 condition)
- B & M short shifter attached to gs-r(DC) shifter ****
- Panasonic mp3/wma deck with SUB out controls
- Full wiring for system with almost brand new wires.
- Alpine speakers in front and Sony explode 6x9's and alpine speakers in back
- 2003-2005 EP3 Sir wheels with 3 falcon tires (195/50/R15) and 1 BF goodrich (70 % left on Tires)
So i want it gone ASAP and Im asking $400 for the car.
Im not online a lot these days so best way to reach me is by my cell,
416 670 2445, if i dont answer just leave a voicemail or txt me.
Anywho for sale is my 1990 Red DA. Everything is in the car including motor. Im not 100% if the valves are fine or not since the timing belt went so you might even get a perfect motor. Im selling as a whole shell for $400. Not really interested in parting out as i don't have the time and i don't want to see a piece of junk in pieces sitting in my driveway.
295,xxx Km's on car and about 150 ish on 2nd B18a1 according to last owner (ys1 tranny) Clutch still strong. Those of you on here who know me can vouch the motor ran perfect no problems until my belt snapped.
- 2.25 inch exhaust piping from cat back
- viper alarm system
- gs-r leather seats in front (6/10 condition)
- Momo course steering wheel (9/10 condition)
- B & M short shifter attached to gs-r(DC) shifter ****
- Panasonic mp3/wma deck with SUB out controls
- Full wiring for system with almost brand new wires.
- Alpine speakers in front and Sony explode 6x9's and alpine speakers in back
- 2003-2005 EP3 Sir wheels with 3 falcon tires (195/50/R15) and 1 BF goodrich (70 % left on Tires)
So i want it gone ASAP and Im asking $400 for the car.
Im not online a lot these days so best way to reach me is by my cell,
416 670 2445, if i dont answer just leave a voicemail or txt me.
08-12-2008, 05:30 PM
#2
Time to become a Premier Member!
Join Date: Mar 2003
Location: www.tittypalace.com
Posts: 3,994
How much for the TI stickers? I want to replace the "R"s with "R"s
08-12-2008, 05:38 PM
#3
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
wont part out the T.I stickers you'll have to buy the whole car. damnit what do u think this is?
08-12-2008, 10:06 PM
#5
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Bump
08-12-2008, 10:46 PM
#6
Senior Member
Join Date: Apr 2007
Location: Wasaga Beach
Posts: 1,036
what a shame....smh
08-12-2008, 11:45 PM
#7
Senior Member
Join Date: Dec 2007
Location: Brampton
Posts: 1,899
I VOUCH FOR THE DJ!! Hes the man, too bad u gotta let this go. Really unfortunate.
08-13-2008, 02:52 AM
#8
Member
Join Date: Jun 2005
Location: Toronto
Posts: 889
ill take it.. just got to see it in person.
08-13-2008, 07:14 AM
#9
Member
Join Date: Dec 2007
Location: Honda-Nation
Posts: 809
wow excellent price I may jump on this!!!
08-13-2008, 11:14 AM
#10
Senior Member
Join Date: Mar 2008
Location: Sauga
Posts: 1,011
Bump for Manny. Try and get something soon theres plenty of things out there when you sell the shell.
08-13-2008, 01:15 PM
#11
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Bump. Thank you homos yousef and bvan. I already got somethin planned, bye bye hondas.
08-13-2008, 05:45 PM
#12
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
bump need this gone asap!
08-13-2008, 09:06 PM
#13
Member
Join Date: Oct 2006
Location: Niagara region
Posts: 772
i need door panel clips,, rubber clips for the hose on the door panels.. holy ---- bar pieces.. power mirror panels.. let me kno droppedgsr@hotmail.com thanks man and i need rear hatch panels for the back.. let me kno soon
08-14-2008, 12:38 AM
#14
Senior Member
Join Date: Dec 2007
Location: Brampton
Posts: 1,899
i dont think hes parting it out lol.
08-14-2008, 01:14 AM
#15
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Its ok bvan i think reading is a rare quality for some of us.
08-14-2008, 01:41 AM
#16
Junior Member
Join Date: Oct 2005
Location: toronto
Posts: 468
i need door panel clips,, rubber clips for the hose on the door panels.. holy ---- bar pieces.. power mirror panels.. let me kno droppedgsr@hotmail.com thanks man and i need rear hatch panels for the back.. let me kno soon
08-14-2008, 02:08 AM
#17
Senior Member
Join Date: Aug 2006
Location: IN VTEC
Posts: 2,375
homo.........
08-14-2008, 06:15 AM
#18
Member
Join Date: Dec 2007
Location: Honda-Nation
Posts: 809
Ye if i had a DA this would already be in my driveway $400 is nothing for a decent shell never mind a fullout car minus an engine, also those rims can net you like $300 on Kijiji this is reallly worth it!
08-14-2008, 11:56 AM
#19
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Come on somebody in sauga must want a parts car
08-14-2008, 01:25 PM
#20
Member
Join Date: Jun 2005
Location: Toronto
Posts: 889
dude im still interested but the soonest i can come see it is probably sunday.
08-14-2008, 02:28 PM
#21
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
My cell number is the key.
08-14-2008, 09:47 PM
#22
Time to become a Premier Member!
Join Date: Mar 2007
Location: London, ON
Posts: 3,681
what is ur cell number... who ever buys the car, I will take the motor off your hands :P
08-15-2008, 06:33 AM
#23
Member
Join Date: Jun 2005
Location: Toronto
Posts: 889
^Sounds like a plan .. already have a donor motor ready to put in, no need fixing this one..
08-15-2008, 12:31 PM
#24
Senior Member
Join Date: Nov 2006
Location: sauga
Posts: 1,482
wow why is this still for sale, some one buy this ,cheap price
08-15-2008, 01:14 PM
#25
Senior Member
Join Date: Mar 2008
Location: Sauga
Posts: 1,011
If I could find a car for 4 bills, I'd pee myself but not needed right now. I can't believe your selling it for 4 bills Manny you wack!
08-15-2008, 01:16 PM
#26
Senior Member
Join Date: Nov 2006
Location: sauga
Posts: 1,482
If i had the cash id be all over this,
Good winter beater, a LS motor is like 200$ . you can have a decent running winter beater for around $800 . or call it a day and drop in a b20
Good winter beater, a LS motor is like 200$ . you can have a decent running winter beater for around $800 . or call it a day and drop in a b20
08-15-2008, 02:50 PM
#27
Member
Join Date: Nov 2007
Location: Toronto
Posts: 548
you know manny is comming when you see the rusty hood lol
08-15-2008, 04:31 PM
#28
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
^ you know shawn is coming when the mothers tell their highschool daughters to come home.
Why hasnt anyone jumped over this yet? Im being nice and not posting it on kijiji instead and making alot more dough, tryin to keep it in the T.I community. If its not gone by this weekend im gonna post on kijiji.
Why hasnt anyone jumped over this yet? Im being nice and not posting it on kijiji instead and making alot more dough, tryin to keep it in the T.I community. If its not gone by this weekend im gonna post on kijiji.
Last edited by DJINFERNO806; 08-15-2008 at 05:21 PM.
08-15-2008, 05:19 PM
#29
Time to become a Premier Member!
Join Date: Mar 2007
Location: London, ON
Posts: 3,681
08-16-2008, 05:31 PM
#30
Junior Member
Join Date: Mar 2008
Location: k-town
Posts: 103
ill give u 200 if i can take anything of the car then u can scrap it for 110
lemme kno
lemme kno
08-16-2008, 07:57 PM
#31
Senior Member
Join Date: Mar 2008
Location: Sauga
Posts: 1,011
Manny, can you give me like 2 of your rims and I'll give you two 13's you saw before, the others only fit the back and the front needs bigger diameter sized rims to pass my caliper and larger sized rotor.
Selling the rims and need something to go on till I get them.
Selling the rims and need something to go on till I get them.
08-16-2008, 10:24 PM
#32
Senior Member
Thread Starter
Join Date: Nov 2006
Location: Mississauga
Posts: 2,084
Bump
Thread
Thread Starter
Forum
Replies
Last Post
DallasW
Integra Parts For Sale
2
07-28-2008 02:14 PM