Ignighted switch in DA
 

I had this in my DC, I wanted to put it in my DA.

What I have it for is fog lights, I decided to put the fogs on my DA now. Fogs are not setup, just the switch with all the wiring.


Step 1- Pry out the pannel that has no use(beside your dimmer) Use a flathead.

Step 2. If you have a vise, put the pannel inbetween the vise. If you dont have a vise put it inbetween your feet and hold it still on the floor with your feet.

Step 3. Get a drill and a pointy drill bit(I used a flathead piece so it would make the hole bigger, I dont have the proper bit).
http://i46.tinypic.com/156zck9.jpg

4. Put the switch through the hole from the bottom **MAKE SURE YOU DONT BREAK THE CLIPS ON THE PANNEL**.

And your done.
http://i45.tinypic.com/2hzh3e9.jpg

Just put the fog lights in, pics up soon