Making lowering springs
 

So here's what i'm thinking

Topic-Making lowering springs
I know NEVER CUT YOUR SPRINGS!! :mad:
As i was thinking about the many reasons for this. And my favorite is that the spring's end is closed or shaped so i wont rotate or hop out of the perch.
So there for the best place to cut them is in the middle. :D

That said i had thought maybe if you compress the spring and then heat it to change the high just like bending pipe? :confused:

Let me know what you think

i don't think it would be that easy, and you would need to be very exacting with temp/heat control for all 4 springs. It may work, but there is a very good chance that the springs could crack under load once put back on the car. I wouldn't do it. Invest in a decent set of springs and you'll be more then happy especially if you are thinking of AutoXing this year. The corning loads are much greater then those on the street.

You should never heat a spring it changed the springs properties and you have no idea/control of the properties the spring is going to take also you will not be heating the entire spring uniformly - youre better off just cutting the springs than applying any kind of heat to them

The costs of used springs is so cheap now that it's not even worth it.

Dumb idea.... especially to do it to an integra..... I had a friend that did that to a set of eibach springs, and the car for the first week was fine, but then one side caved in, and the car was sitting uneven.

your better of going to pacific mall, buying a set for cheap, or checking out public msg boards.

heating a spring is almost as bad as cutting it, by heating the middle, the tension of the spring is reduced at that middle point, then you hit a bump and it cracks. guy, you can pick up a set of tomm motorsports coilovers for like $180 cash.

the cheapest way is buy coilovers from ebay. cutting or heating springs = danger

It was just a thought I allready have coilovers

Actually there is a place in Scarboro that makes springs for cars and they can doit for you. I have the name some where.
they want 50 $ per spring

Re: Making lowering springs
 

place in Newmarket sells hyperco eibalch and one more 80$ a spring I bought hypercos for my old civic and they were great. I think they do progressive and linear not 100% on that though

Re: Making lowering springs
 

That was posted 8 year ago I think he figured it out already lol

Re: Making lowering springs
 

Lol didnt read the date my bad

Re: Making lowering springs
 

Wow taking bout a thread 8 years old this topic should have did like the concept of cutting springs what a bad idea ahhahaha

Re: Making lowering springs
 

Talking*

Re: Making lowering springs
 

Should have died* f$&king auto correct

Re: Making lowering springs
 

This sounds like a crazy idea buddy