Installing door panels
Ok I cant be the only one that ever had this issue...there must be a walk through on how to install door panels after taking them off...everytime i put them on and put the clips in the lock and handle doesnt look lined up how it should be. It doesnt make sence though because all the clips find there right spots in the door.
|
Lol I had this problem yesterday. Some guidance from nizmo and it got done. It's most likely the top part by the window. You gotta make sure it's in there snug and pushed down before the clips go in just keep trying.
|
You just have to make sure the top of the panel is on the lip right where the window starts I find it's easier to do when the window is down good luck
|
easy as pie bro, have me come over and do them for you LOL. Ask paul how i did ahhahaha!
|
Yup, FIRST thing you do is line up the lip on the window and make sure that that is in and THEN attach the clips, still making sure the lip is in where it should be. Should have to do a bit of grunting and smacking but it will all line up again so long as that part is taken care of.
|
Yep, its pretty much exactly how they described above. I used a little bit of force when putting mine on.. gotta kinda smack it into place. :D
|
these panels need alot of force it seems. im trying to be careful not to break anything
|
All times are GMT -5. The time now is 08:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands