Big day today...
#1
Big day today...
So today I installed a new transmission into my car (there were some bearing issues with one that I was going to be using... long story). All went well with the install and I took advantage of the warmer weather and decided to get the street tune started.
King Motorsports provided me with a VERY good basemap based on the specifications I gave them for my build. These guys are simply the best!!
After spending about 30mins getting the low speed and low load portions of the map sorted out I started working on the more interesting part of the maps.
In the end I managed to get a pretty decent start on the map with the A/F ratios looking pretty good. I'll have to do some fine adjustments but they are within 0.2 of my targets everywhere.
I'm going to have to work on the idle a bit more. The pro1 cams are not like other cams... while I managed a good idle in the garage over the winter, things changed a little when I hit the road. It wasn't terrible but it wasn't great either.
The engine saw many trips to 9000 RPM today and felt like it wanted to go much further. The A/F maps were telling me that the car wanted more and more fuel as the RPM was hitting the 9000RPM mark, a good indicator that the engine is still making good power up there.
What blew me away with this engine is how incredibly light it feels. It is not like anything I have ever driven. Rev matching is completely effortless. The engine spins up and down so quickly.
Frictional losses in the engine were also VERY small. When trying to engine break (to help seal the rings). I could barely feel any drag induced by the engine.
I headed back to the garage after about an hour and cracked open a beer and fell in love with my car again...
Tuning was done with Hondata S300 and PLX-R500 WB O2 sensor. The PLX has a headphone output which allowed me to listen to the knock sensor as I setup the maps. Much more accurate then simply listening for the marbles in a tin can.
And finaly some pictures for Amanda :P
King Motorsports provided me with a VERY good basemap based on the specifications I gave them for my build. These guys are simply the best!!
After spending about 30mins getting the low speed and low load portions of the map sorted out I started working on the more interesting part of the maps.
In the end I managed to get a pretty decent start on the map with the A/F ratios looking pretty good. I'll have to do some fine adjustments but they are within 0.2 of my targets everywhere.
I'm going to have to work on the idle a bit more. The pro1 cams are not like other cams... while I managed a good idle in the garage over the winter, things changed a little when I hit the road. It wasn't terrible but it wasn't great either.
The engine saw many trips to 9000 RPM today and felt like it wanted to go much further. The A/F maps were telling me that the car wanted more and more fuel as the RPM was hitting the 9000RPM mark, a good indicator that the engine is still making good power up there.
What blew me away with this engine is how incredibly light it feels. It is not like anything I have ever driven. Rev matching is completely effortless. The engine spins up and down so quickly.
Frictional losses in the engine were also VERY small. When trying to engine break (to help seal the rings). I could barely feel any drag induced by the engine.
I headed back to the garage after about an hour and cracked open a beer and fell in love with my car again...
Tuning was done with Hondata S300 and PLX-R500 WB O2 sensor. The PLX has a headphone output which allowed me to listen to the knock sensor as I setup the maps. Much more accurate then simply listening for the marbles in a tin can.
And finaly some pictures for Amanda :P
#7
My gut tells me that if your piston/rod weight combination is close to what I'm using then the improved responsiveness of the engine will be pretty much the same...
#9
There's plenty to do outside my room but I choose not to!
Join Date: Sep 2003
Location: Somewhere
Posts: 5,183
Sorry we couldn't stop by Doug. I had something to do today. Now I'm really regretting not seeing your babyboy!!
THANK YOU for posting pics of him! Tell Melanie she looks great for giving birth only 7 weeks ago. I think Rachel might have some competition with her baby brother. They look VERY similar!
THANK YOU for posting pics of him! Tell Melanie she looks great for giving birth only 7 weeks ago. I think Rachel might have some competition with her baby brother. They look VERY similar!
#11
Sorry we couldn't stop by Doug. I had something to do today. Now I'm really regretting not seeing your babyboy!!
THANK YOU for posting pics of him! Tell Melanie she looks great for giving birth only 7 weeks ago. I think Rachel might have some competition with her baby brother. They look VERY similar!
THANK YOU for posting pics of him! Tell Melanie she looks great for giving birth only 7 weeks ago. I think Rachel might have some competition with her baby brother. They look VERY similar!
Stock fuel rail (I may pick up Skunk2 composite fuel rail to complete my bling), stock fuel pump, and RC440 injectors.
#15
Well Doug.....you've pushed me to it.....
FIRST OF ALL, I'm in NO WAY INTENDING TO JACK THIS THREAD .......
BUT....
Here's OUR Big Day Present......
Born March 14th @ 1046 am, @ 7 lbs, 5oz's......Jacob Piers.
and another addition I was talking to your wife about.....presenting the obligatory track car (EH2/EG6) towing machine, now we CAN RUN the track car HARD and take trannies out without worrying about gettin her home, and it WILL TOW 2200 MORE lbs than a Ridgeline.....we've had NOTHING BUT ENDLESS PROBLEMS with the Pilot, so here's our V8 POWA 4Runner bringing the new Baby home!!!!!!!
PLEASE, PLEASE, PLEASE Doug email me and let me know when your doing your next street tune.....my brother and I who took some of the below shots, would love to talk PHOTOG with you and join you in your next street tune session.....
email me Man, and let's set it up....and once again, sorry for the thread jack but with all the EXCELLENT new news going around I just really thought I had to share with Jacob Piers, my first and new Son!!!!!
Oh Ya....after what I went through with THREE different Honda, and one Acura "Stealer" over TWO Winters, I'LL NEVER purchase a Honda/Acura SUV EVER again.....sorry Doug, just had to add that....I'll ALWAYS OWN Honda Cars!
FIRST OF ALL, I'm in NO WAY INTENDING TO JACK THIS THREAD .......
BUT....
Here's OUR Big Day Present......
Born March 14th @ 1046 am, @ 7 lbs, 5oz's......Jacob Piers.
and another addition I was talking to your wife about.....presenting the obligatory track car (EH2/EG6) towing machine, now we CAN RUN the track car HARD and take trannies out without worrying about gettin her home, and it WILL TOW 2200 MORE lbs than a Ridgeline.....we've had NOTHING BUT ENDLESS PROBLEMS with the Pilot, so here's our V8 POWA 4Runner bringing the new Baby home!!!!!!!
PLEASE, PLEASE, PLEASE Doug email me and let me know when your doing your next street tune.....my brother and I who took some of the below shots, would love to talk PHOTOG with you and join you in your next street tune session.....
email me Man, and let's set it up....and once again, sorry for the thread jack but with all the EXCELLENT new news going around I just really thought I had to share with Jacob Piers, my first and new Son!!!!!
Oh Ya....after what I went through with THREE different Honda, and one Acura "Stealer" over TWO Winters, I'LL NEVER purchase a Honda/Acura SUV EVER again.....sorry Doug, just had to add that....I'll ALWAYS OWN Honda Cars!
Last edited by candice; 03-27-2007 at 05:20 AM.
#17
#18
Paul,
Sorry for the delay... things are very crazy at work right now.
Your boy looks great! you must be over the moon. Congratulations^2!
Because things are so busy now tuning is pretty much going on when ever I get a free moment. I'd love to have you and your brother come down and over see the development however it would be impossible to plan it. Maybe in a couple weeks we can hook up.
Besides... your a very busy man these days as well
#19
Paul,
Sorry for the delay... things are very crazy at work right now.
Your boy looks great! you must be over the moon. Congratulations^2!
Because things are so busy now tuning is pretty much going on when ever I get a free moment. I'd love to have you and your brother come down and over see the development however it would be impossible to plan it. Maybe in a couple weeks we can hook up.
Besides... your a very busy man these days as well
Sorry for the delay... things are very crazy at work right now.
Your boy looks great! you must be over the moon. Congratulations^2!
Because things are so busy now tuning is pretty much going on when ever I get a free moment. I'd love to have you and your brother come down and over see the development however it would be impossible to plan it. Maybe in a couple weeks we can hook up.
Besides... your a very busy man these days as well
Excellent to hear from you Doug....
OVER THE MOON!!!!!!! YES!!!!!!
Mom and Baby are VERY fine!!!! But yes I am also quite busy....
Fair enough Man with regards to tuning....you know my email....PLEASE, PLEASE, PLEASE Keep in touch....also you'll be starting your track sessions this year.....you MUST share critical contact and date information with regards to this as well, I am EAGERLY looking to track the EG/EH2 this Summer, hense the new V8 TOW Machine.....
Like I say, you know the email address.....keep me informed of tuning and racing.....
#20
There's plenty to do outside my room but I choose not to!
Join Date: Sep 2003
Location: Somewhere
Posts: 5,183
So we went to see Doug's beautiful babyboy yesterday and let me tell you guys...these pics don't do justice for the real thing.
Doug and Melanie you guys have your hands full with Rachel and now Will.....they're very cute kids so spoiling them won't be that hard.....
Thanks again for allowing us to come and be entertained by your children and Mike of course...lol
Doug and Melanie you guys have your hands full with Rachel and now Will.....they're very cute kids so spoiling them won't be that hard.....
Thanks again for allowing us to come and be entertained by your children and Mike of course...lol
#21
Amanda,
Always great to have you and Trenell out our way! Rachel enjoyed your reading to her and I know you enjoyed learning her tricks for staying up late...
It's a shame the weather is not so great on your big day...
Trenell,
What tuner did you use last year?
Always great to have you and Trenell out our way! Rachel enjoyed your reading to her and I know you enjoyed learning her tricks for staying up late...
It's a shame the weather is not so great on your big day...
Trenell,
What tuner did you use last year?
Thread
Thread Starter
Forum
Replies
Last Post
raideraid
Integra Parts For Sale
1
06-06-2011 12:17 PM