Hey Anthony pick up some extra stripper for me and I'll bring it when I cone for the swap. Where would it best getting the paint I got a place that does custom paint they can match any colour I'll ask them if they got something for valve covers. If bot any good places too look? It's gotta be a heat resistant one correct. Cuz the one I used on that b18b1 there I used Caliper paint. Did a bad job in it. Did bot sand it very well.
|
i already got stripper. used it on my deck. Bring ur valve cover over. we`ll get it nice and fancy
|
black and red looks good together i think so.
|
I was thinking of polishing my valve cover.... what do you guys thinks??
What are the actual procedures involved? I heard it is a PITA to do.... Thanks in advance!!!! |
2 Attachment(s)
heres mine :)
Attachment 11586 I may try and get this cover wraped in carbon since I have some available, or i'll end up painting it... Attachment 11587 |
hand polished valve cover
it took me apprx 3 days to polished this..http://img190.imageshack.us/img190/6002/b18b.jpg
|
2 Attachment(s)
|
lol I just removed my heatshield while I was in there... meh! lol
|
Originally Posted by Martin_SRV
(Post 303367)
it took me apprx 3 days to polished this..http://img190.imageshack.us/img190/6002/b18b.jpg
nice looks good did you clear coat it or anything? ---- so you did that by hand? |
Originally Posted by Martin_SRV
(Post 303367)
it took me apprx 3 days to polished this..http://img190.imageshack.us/img190/6002/b18b.jpg
|
^ thats an obd2 valve cover 96-01
|
Yea yea. Thats what I mean. I just cant get my hands on one :( Every ones sellign the engine, but not the valve cover :(
|
Nice!
Looking good guys/gals!
|
Originally Posted by Vida
(Post 303385)
FAK . You beat me to it. I was looking for a Second gen B18B1/B20 Valve cover so i could polish it to look like that. Very nice man. buuuuuut Im gonna have to copy it. loool.Ive had it in mind for ages, I just never got that DAMN VALVE COVER!
Good job on the cover. |
nope i didn't put clear coat on it, i used peek poolishing paste i got it from canadian tire
Originally Posted by irsdb7
(Post 303382)
nice looks good did you clear coat it or anything?
---- so you did that by hand? |
i have another one for sale b20 valve cover in black for $50
Originally Posted by Vida
(Post 303385)
FAK . You beat me to it. I was looking for a Second gen B18B1/B20 Valve cover so i could polish it to look like that. Very nice man. buuuuuut Im gonna have to copy it. loool.Ive had it in mind for ages, I just never got that DAMN VALVE COVER!
|
|
Originally Posted by Martin_SRV
(Post 303518)
nope i didn't put clear coat on it, i used peek poolishing paste i got it from canadian tire
|
Originally Posted by Spike
(Post 303528)
You should still clear coat it. because the polish paste will come off over time, and it will start to rust.
|
Valve Cover Build-Off
Design your valve cover and post it here. Once there are 10 contestents that want to participate, the buildoff will begin.
Rules: You cannot post previous designs, it has to be one that you start from scratch from this moment on. You can change your design anytime within the competition unless said otherwise. Lets go This is what I might start off with. Just did it today. http://i44.tinypic.com/1yk9om.jpg |
1 Attachment(s)
|
Yours is amazing. How did you get the tape in there so thin.
|
1 Attachment(s)
|
Originally Posted by JDM_overdose
(Post 314742)
Yours is amazing. How did you get the tape in there so thin.
Looking good J |
Sweet valve covers but i'm heavily digging nizmo's, it's got that clean classy look
|
Originally Posted by 1goodyr
(Post 315154)
|
|
What the ----!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Is that real!??!?!?!
|
highly doubt that hahaha that motor would twist the ---- of that teg ....
its deff madly photoshopd man .. |
yea its photoshopped. you can tell.
I dragged the pic into my photoshop and compared the pixles from the fenders to the engine. the pixles are way off. photochopped |
u guys r real good with photoshop holy cow that pic looks legit lol
|
this is what i plan to do with mine
same paint, not same paint colours http://a452.ac-images.myspacecdn.com...6f3d8ad97b.jpg |
That photoshop pic is old. I saw that few years back...
|
Originally Posted by dimasbenz
(Post 316456)
this is what i plan to do with mine
same paint, not same paint colours http://a452.ac-images.myspacecdn.com...6f3d8ad97b.jpg |
Originally Posted by dimasbenz
(Post 316456)
this is what i plan to do with mine
same paint, not same paint colours http://a452.ac-images.myspacecdn.com...6f3d8ad97b.jpg |
1 Attachment(s)
I spent Friday night and Saturday afternoon doing this
3 coats silvery blue like bumper holder, 3 coats blue metal cast. Spent a good couple hours sanding by hand too haha. |
Originally Posted by ridgwaym27
(Post 316578)
I spent Friday night and Saturday afternoon doing this
3 coats silvery blue like bumper holder, 3 coats blue metal cast. Spent a good couple hours sanding by hand too haha. That blue is so vivid...your efforts paid off, for sure. Nice work. |
1 Attachment(s)
heres my entry
|
1 Attachment(s)
heres mine.. may jsut go back to black
|
bump
|
^^^ funny was thinking of this thread last night. :yeah:
|
I'll have a new valve cover pic to post soon... ;)
|
we should now post pics of the valve covers on the motors(Y) check out the dirty engine bays lol
|
I still wanna get my done, it's something I have never seen done before so it should be Epic lol.
|
Some nice valve covers in here.
|
2 Attachment(s)
|
Owwaw fancy. Where did you get yours done I'm looking for a place to get mine done.
|
Originally Posted by AcuratePaul
(Post 336511)
Owwaw fancy. Where did you get yours done I'm looking for a place to get mine done.
|
Re: Post Pictures of your valve covers
1 Attachment(s)
|
Re: Post Pictures of your valve covers
Owwww so shinny.
|
Re: Post Pictures of your valve covers
nice
|
Re: Post Pictures of your valve covers
3 Attachment(s)
|
All times are GMT -5. The time now is 10:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands