Hey everyone, i have finally decided to make a build thread. For anyone that doesnt know, i bought a 1999 Acura Integra RS/SE. Its in minty shape with no rust. The pervious owners took VERY good care of this car and thats the reason I bought the car. Everything was maintained on this car with only Acura parts and was installed by Acura tech's. The car came with all the maintanence paper work, rust-proofing reciepts and OEM parts that were replaced by performance parts. Here is what the owner before me has done.
Engine:
Stock B18B
K&N Filtercharger intake system
JDM Integra Type-R Full Exhaust
DC 4-1 Header
Castrol Syntec oil changes every 5k
NGK Blue wires
NGK Platinum plugs
Water Pump
Timing Belt
Suspension:
PIC Select 12Kf/10Kr damping adjustable coilovers
Megan LCAs
Integra Type-R front tie bar
Wheels:
15" Rota Slipstreams in bronze tires
Exterior:
8000k HIDs
Replica Mugen lip
Clear corners
Crystal clear headlights
So lets get started on what I have to work with
Here is what the car looked like when I first picked it up....



Pretty sweet ride to start with, and now here is what I have done to it so far.....
I tinted it 30% all around and put on a set of meshies w/Kumho rubber.

Added a AEM CAI, painted the Valve cover quickly, and tucked the HID's(thanks Vida and Dave) and added a set of "password JDM" rad stays to it
DSC00834.jpg?t=1271603771
DSC00835.jpg?t=1271603888
Brushed aluminum bezel cover
DSC00836.jpg?t=1271603937
Added a OEM ITR Shift boot and finally found OEM floor mats!!!!
DSC00832.jpg?t=1271604043
Hatch struts!
DSC00838.jpg?t=1271604168
Valve cover that I'm thinking of painting a "unique" color and theme
DSC00839.jpg?t=1271604215
Found a set of wiper arms that will get the re-paint treatment later this week
DSC00831.jpg?t=1271604332
FUTURE PLANS
-LS/VTEC swap(not for 6 months)
-Clean set of DC2 ITR Black Recaro's
-ITR front lip
-ITR SRS steering wheel or leather wrap my stocker
-ITR Door panels
-ITR/Blox Shift ****
-Shave spoiler....still thinking about it
-And some little things here and there to clean up.
Comments, suggestions and opinions welcome
Engine:
Stock B18B
K&N Filtercharger intake system
JDM Integra Type-R Full Exhaust
DC 4-1 Header
Castrol Syntec oil changes every 5k
NGK Blue wires
NGK Platinum plugs
Water Pump
Timing Belt
Suspension:
PIC Select 12Kf/10Kr damping adjustable coilovers
Megan LCAs
Integra Type-R front tie bar
Wheels:
15" Rota Slipstreams in bronze tires
Exterior:
8000k HIDs
Replica Mugen lip
Clear corners
Crystal clear headlights
So lets get started on what I have to work with

Here is what the car looked like when I first picked it up....



Pretty sweet ride to start with, and now here is what I have done to it so far.....
I tinted it 30% all around and put on a set of meshies w/Kumho rubber.

Added a AEM CAI, painted the Valve cover quickly, and tucked the HID's(thanks Vida and Dave) and added a set of "password JDM" rad stays to it
DSC00834.jpg?t=1271603771
DSC00835.jpg?t=1271603888
Brushed aluminum bezel cover
DSC00836.jpg?t=1271603937
Added a OEM ITR Shift boot and finally found OEM floor mats!!!!
DSC00832.jpg?t=1271604043
Hatch struts!
DSC00838.jpg?t=1271604168
Valve cover that I'm thinking of painting a "unique" color and theme
DSC00839.jpg?t=1271604215
Found a set of wiper arms that will get the re-paint treatment later this week
DSC00831.jpg?t=1271604332
FUTURE PLANS
-LS/VTEC swap(not for 6 months)
-Clean set of DC2 ITR Black Recaro's
-ITR front lip
-ITR SRS steering wheel or leather wrap my stocker
-ITR Door panels
-ITR/Blox Shift ****
-Shave spoiler....still thinking about it
-And some little things here and there to clean up.
Comments, suggestions and opinions welcome
Thanks for the comments guys! I have done some work today and have some things planned for this week. Post pics later on
**UPDATE**
So i painted the tattered and chipped wiper arms, VERY happy with the turnout. Also, David and I went to the junkyard(again lol) and picked up an extra arm rest, which will be re-done in black suede with red stich. Going to be starting on the valve cover as well this week.
Keep you posted on the turnout.



And heres the armrest

There's plenty to do outside my room but I choose not to!
Ur gona get ur *** whooped for painting on that wall.
Quote:
Originally Posted by teggboi
LOL nizmo you totally don't care about that wall!
Quote:
Originally Posted by JDM_overdose
Ur gona get ur *** whooped for painting on that wall.
Quote:
Nah im hardcore like that...wall's are my bitchesOriginally Posted by AcuratePaul
was thinking the same thing about the wall lmao.
Member
Quote:
Hahahahaha I like that one. I may do the same thing. I also need to paint my wipers. It is so shiny that is blinds me sometimess Originally Posted by nizmo
Nah im hardcore like that...wall's are my bitches
n00b
Except when i get involved....then ryan becomes the walls bitch lmao. the floor was worse when he painted the intake pipe...and our apartment smelt like paint for days! but im glad that he is keeping it as stock as possible.... now just to paint the rear calipers........ better get on that!
**UPDATE**
So i have finally finished a few things.
I went over to a friends house yesturday and worked on the Teg. We completely disassembled my PIC coil-over suspension. We cleaned and degreased it and changed the height on the car too. Looks much better now. Also mixed up the dampening a bit too...btw, this suspension OWNS ALL!!! Also in the pics is my buddy's SR20DET powered 240SX....









I put my newly painted wiper arms back on and I also sanded and prepped my B18 Valve cover for some paint. Im thinking of going wrinkle red and add some black on the 3 stripes. Weigh in with your thoughts. here are the pics....
NEW WIPER ARMS

BEFORE

AFTER


More to come......
n00b
so much for planning for my birthday!!! u were too busy sprucing up the car!!!!!!! hahah kidding hun, looks mint as always... i can attest to all the hard work you put forth to make this baby as nice as the day it rolled off the lot!
Looking good once again Ryan keep up the good and hard work
and try not to paint the floor when doing your valve cover 
and try not to paint the floor when doing your valve cover 
Junior Member
looking good..did you sell the rota slips or you still have em? because i personally think the rota slips look amazing on your teg
YOU BITCH YOU FOR YOUR CAR BEING SEXY.
I love it!
PS, what we were talking about at the meet...
GAME OVERRRRRRRRRRRRRRR
keep it on meshies, or blades, or something else. BUT DAYUMMMM

I love it!
PS, what we were talking about at the meet...
GAME OVERRRRRRRRRRRRRRR
keep it on meshies, or blades, or something else. BUT DAYUMMMM

Quote:
and try not to paint the floor when doing your valve cover
thanks paul! ---- da wall!Originally Posted by AcuratePaul
Looking good once again Ryan keep up the good and hard work
and try not to paint the floor when doing your valve cover
Quote:
Ya rotas did look good, but in my opinoin....they are played out, everyone has some sort of Rota's on their ride. SoOEM is for meOriginally Posted by kartheegan
looking good..did you sell the rota slips or you still have em? because i personally think the rota slips look amazing on your teg

Quote:
I love it!
PS, what we were talking about at the meet...
GAME OVERRRRRRRRRRRRRRR
keep it on meshies, or blades, or something else. BUT DAYUMMMM
HOLY FACK!!! OOOOVVVVVVVEEEEERRRRROriginally Posted by Vida
YOU BITCH YOU FOR YOUR CAR BEING SEXY. I love it!
PS, what we were talking about at the meet...
GAME OVERRRRRRRRRRRRRRR
keep it on meshies, or blades, or something else. BUT DAYUMMMM
***UPDATE***
Well I went out and bought a pair of headlights because although mine look ok, I just got laid off and have nothing to do at home lol. Here is the before and after shot.

Sanded them

Finished!!!

also, i painted my VC. i will put pics up soon

Just snapped some pics of the VC i just painted. It looks darker in person but let me know what you think.
This is the paint i used, and yes it does wrinkle which is different.

Heres the finished product

And the famous.....WALL!!!!!!!!!

This is the paint i used, and yes it does wrinkle which is different.

Heres the finished product

And the famous.....WALL!!!!!!!!!

Sand off the Honda letters and you'll have some noice looking letters.
SICK man, that wall is MAD dope.. OH YEA, and the VC too. Loool jks jks
SICK man, that wall is MAD dope.. OH YEA, and the VC too. Loool jks jks
There's plenty to do outside my room but I choose not to!
Where did you get that paint
Quote:
SICK man, that wall is MAD dope.. OH YEA, and the VC too. Loool jks jks
I plan to when its fully cured. Most likely it will be done tomorrow. I will post pics when I install itOriginally Posted by Vida
Sand off the Honda letters and you'll have some noice looking letters. SICK man, that wall is MAD dope.. OH YEA, and the VC too. Loool jks jks
Quote:
Crappy tire, in the automotive section. They have different colored wrinkle paint there.Originally Posted by JDM_overdose
Where did you get that paint
Member
Still down to get rid of your other headlights? I need some bad, mine look like your 2nd pic... I have no idea about the process involved with "wetsanding".
Member
Haha, lookin' good man. Nice to see the same disregard for walls, and floors as I do when spray painting stuff.. I wouldn't worry about the paint that probably blows with the wind off the balcony either 

Quote:
Look up on the DIY section. There is a write up there. Its a piece of cake. It pretty much removes all that haze out of your headlights and makes them crystal clear again, which improves look, and Ill say also improves light outputOriginally Posted by Mixed1
Still down to get rid of your other headlights? I need some bad, mine look like your 2nd pic... I have no idea about the process involved with "wetsanding".
ps: my bad if it shows that your post was edited, i clicked edit instead of quote, loool.

. How much did you get the car for?