Kaptain Keith's da9. The "Statement"
1 Attachment(s)
Kso. My plan. To build the cleanest period correct da ever.
Lets get started. Heres a pic of the tools. https://www.torontointegras.ca/attac...ine=1330089199 |
Re: Kaptain Keith's da9. The "Statement"
6 Attachment(s)
Some rough shots of the da
https://www.torontointegras.ca/attac...ine=1330089810 https://www.torontointegras.ca/attac...ine=1330089810 https://www.torontointegras.ca/attac...ine=1330089810 https://www.torontointegras.ca/attac...ine=1330089810 https://www.torontointegras.ca/attac...ine=1330089810 https://www.torontointegras.ca/attac...ine=1330089810 |
Re: Kaptain Keith's da9. The "Statement"
Long live the DA! I tried to restore mine, broke the bank and me at the same time :(. But yeah everyone loves build threads keep this one going!
|
Re: Kaptain Keith's da9. The "Statement"
5 Attachment(s)
Rockers are shot.
https://www.torontointegras.ca/attac...ine=1330090382 Cut out the bad and sandblasted and primered. https://www.torontointegras.ca/attac...ine=1330090382 Then replace with new. All welded. https://www.torontointegras.ca/attac...ine=1330090382 https://www.torontointegras.ca/attac...ine=1330090382 https://www.torontointegras.ca/attac...ine=1330090382 https://www.torontointegras.ca/attac...ine=1330090382 |
Re: Kaptain Keith's da9. The "Statement"
5 Attachment(s)
Dry fitment
https://www.torontointegras.ca/attac...ine=1330090842 This takes alot of time https://www.torontointegras.ca/attac...ine=1330090842 60 gal air comp with custom belt guard https://www.torontointegras.ca/attac...ine=1330090842 This does get sickening. https://www.torontointegras.ca/attac...ine=1330090842 https://www.torontointegras.ca/attac...ine=1330090842 |
Re: Kaptain Keith's da9. The "Statement"
3 Attachment(s)
Same ---- on the otherside too
https://www.torontointegras.ca/attac...ine=1330095263 Rear inner well. https://www.torontointegras.ca/attac...ine=1330095263 https://www.torontointegras.ca/attac...ine=1330095263 |
Re: Kaptain Keith's da9. The "Statement"
3 Attachment(s)
|
Re: Kaptain Keith's da9. The "Statement"
9 Attachment(s)
Rear 1/4. although it looks more like an 1/8
https://www.torontointegras.ca/attac...ine=1330096895 https://www.torontointegras.ca/attac...ine=1330096895 Piece i savaged from a scrap car. https://www.torontointegras.ca/attac...ine=1330096895 Out with the old https://www.torontointegras.ca/attac...ine=1330096895 In with new. I use a cold wet rag to cool the welds so it wonr warp https://www.torontointegras.ca/attac...ine=1330096895 Back hatch corner. Salvaged piece. https://www.torontointegras.ca/attac...ine=1330096895 https://www.torontointegras.ca/attac...ine=1330096895 Perfect fit. https://www.torontointegras.ca/attac...ine=1330096895 Thats whats up. https://www.torontointegras.ca/attac...ine=1330096895 |
Re: Kaptain Keith's da9. The "Statement"
Next im onto sandblasting and self etching primer on the bare metal.
|
Re: Kaptain Keith's da9. The "Statement"
So do you just leave all those spot welds without finishing it off??
btw what mask is that? |
Re: Kaptain Keith's da9. The "Statement"
Originally Posted by D.T.P
(Post 345049)
So do you just leave all those spot welds without finishing it off??
btw what mask is that? |
Re: Kaptain Keith's da9. The "Statement"
8 Attachment(s)
https://www.torontointegras.ca/attac...ine=1330177391
https://www.torontointegras.ca/attac...ine=1330177391 https://www.torontointegras.ca/attac...ine=1330177391 Ya. Thats a k20a2 sittn there. Lol https://www.torontointegras.ca/attac...ine=1330177391 https://www.torontointegras.ca/attac...ine=1330177391 https://www.torontointegras.ca/attac...ine=1330177391 https://www.torontointegras.ca/attac...ine=1330177391 https://www.torontointegras.ca/attac...ine=1330177391 |
Re: Kaptain Keith's da9. The "Statement"
I got 700 man hours into it. I got it nov. 2010 and havent even drove it yet.
So.. 4x8 piece of sheet metal. 3gals. Of body filler. 4 sprayable gallons of paint and primer. And a ton of sandpaper. Next is the engine bay. I will relocate the battery to the hatch. Relocate the underhood fuse box. Under the dash. Wire tuck it all. Tuck the brake lines. Relocate the proportion valve... Under dash. Convert to a manuel steer rack from an ef. Strip and paint everything using the highest quality paint money can buy. Thanks for checkn out my build so far. Although its more of a resto at the moment, but i do have some tricks yp my sleeve for performance. |
Re: Kaptain Keith's da9. The "Statement"
nice work so far, good luck.
|
Re: Kaptain Keith's da9. The "Statement"
Thnx Malice. I Didnt mean to be rude. I can relate to the whole time and money thing.
Stay tuned forthe engine bay pics. The colour i pickd is an oem camillia red pearl. |
Re: Kaptain Keith's da9. The "Statement"
Originally Posted by Kaptain Keith
(Post 345062)
Thnx Malice. I Didnt mean to be rude. I can relate to the whole time and money thing.
Stay tuned forthe engine bay pics. The colour i pickd is an oem camillia red pearl. |
Re: Kaptain Keith's da9. The "Statement"
this probably will be the cleanest DA in history
|
Re: Kaptain Keith's da9. The "Statement"
Kso. Is it time for wire/brake line tuck pics?
|
Re: Kaptain Keith's da9. The "Statement"
AWESOME.
Keep it up! More pics pls! |
Re: Kaptain Keith's da9. The "Statement"
11 Attachment(s)
Kso. I dissconected the fuse box. Pulld the wire harness into the car.
https://www.torontointegras.ca/attac...ine=1330185454 New location for fuse box. Not yet secured. https://www.torontointegras.ca/attac...ine=1330185454 Wire harness is routed through the fender. https://www.torontointegras.ca/attac...ine=1330185454 Next is the driverside. Gotta make room to work. https://www.torontointegras.ca/attac...ine=1330185454 Wire world is sorted and ready to be rerouted. https://www.torontointegras.ca/attac...ine=1330185454 Wire harness is located so low that you cant see. https://www.torontointegras.ca/attac...ine=1330185454 Custom made brake lines. So i can run them under the dash. https://www.torontointegras.ca/attac...ine=1330185454 I left em long. Rough in. https://www.torontointegras.ca/attac...ine=1330185454 Fire wall fitting for my brake lines. https://www.torontointegras.ca/attac...ine=1330185454 Dry fit. https://www.torontointegras.ca/attac...ine=1330185454 Old prop valve location. https://www.torontointegras.ca/attac...ine=1330185454 New spot. Behind the stereo. https://www.torontointegras.ca/attac...ine=1330185454 |
Re: Kaptain Keith's da9. The "Statement"
11 Attachment(s)
Kso. I dissconected the fuse box. Pulld the wire harness into the car.
https://www.torontointegras.ca/attac...ine=1330185466 New location for fuse box. Not yet secured. https://www.torontointegras.ca/attac...ine=1330185466 Wire harness is routed through the fender. https://www.torontointegras.ca/attac...ine=1330185466 Next is the driverside. Gotta make room to work. https://www.torontointegras.ca/attac...ine=1330185466 Wire world is sorted and ready to be rerouted. https://www.torontointegras.ca/attac...ine=1330185466 Wire harness is located so low that you cant see. https://www.torontointegras.ca/attac...ine=1330185466 Custom made brake lines. So i can run them under the dash. https://www.torontointegras.ca/attac...ine=1330185466 I left em long. Rough in. https://www.torontointegras.ca/attac...ine=1330185466 Fire wall fitting for my brake lines. https://www.torontointegras.ca/attac...ine=1330185466 Dry fit. https://www.torontointegras.ca/attac...ine=1330185466 Old prop valve location. https://www.torontointegras.ca/attac...ine=1330185466 New spot. Behind the stereo. https://www.torontointegras.ca/attac...ine=1330185466 |
Re: Kaptain Keith's da9. The "Statement"
Thats that. Any questions?
On to the nasty engine bay then. |
Re: Kaptain Keith's da9. The "Statement"
Originally Posted by bradnyan
(Post 345065)
this probably will be the cleanest DA in history
|
Re: Kaptain Keith's da9. The "Statement"
JDM parts acquired:
-2nd gen b16 and cable ys1tranny (actual xsi setup). -p30 ecu -Mugen susspension on green tiens. -rear lca's. -tail lights. -1 pc headlights. -side markers. -2 obdo front bumpers. 1 rear. -spoiler. Thats pretty good. Cause this ---- is hard to find for a da. |
Re: Kaptain Keith's da9. The "Statement"
10 Attachment(s)
Got the engine out. So its time to remove everything..
https://www.torontointegras.ca/attac...ine=1330193035 Organized an ready to be cleand an painted https://www.torontointegras.ca/attac...ine=1330193035 Im replacing most the hardware. https://www.torontointegras.ca/attac...ine=1330193035 Sande, sandblaste cleaned and taped. https://www.torontointegras.ca/attac...ine=1330193035 High build primer. Capable of filling 80grit. https://www.torontointegras.ca/attac...ine=1330193035 What can i say. Oem Ppg Camillia Red Pearl. https://www.torontointegras.ca/attac...ine=1330193035 https://www.torontointegras.ca/attac...ine=1330193035 https://www.torontointegras.ca/attac...ine=1330193035 https://www.torontointegras.ca/attac...ine=1330193035 Like a G6. [IMG]https://www.torontointegras.ca/attac...ine=1330193035[/IMG] |
Re: Kaptain Keith's da9. The "Statement"
1 Attachment(s)
|
Re: Kaptain Keith's da9. The "Statement"
5 Attachment(s)
2nd gen b16
https://www.torontointegras.ca/attac...ine=1330198783 https://www.torontointegras.ca/attac...ine=1330198783 https://www.torontointegras.ca/attac...ine=1330198783 Alternator even got new hardware. https://www.torontointegras.ca/attac...ine=1330198783 And the starter. https://www.torontointegras.ca/attac...ine=1330198783 |
Re: Kaptain Keith's da9. The "Statement"
9 Attachment(s)
Fuel filter/water seperator.
https://www.torontointegras.ca/attac...ine=1330200098 https://www.torontointegras.ca/attac...ine=1330200098 S2 nutswingn https://www.torontointegras.ca/attac...ine=1330200098 Marshall fuel pressure guage. https://www.torontointegras.ca/attac...ine=1330200098 Ummm. 6' of Russel -6. and 6' of -8. https://www.torontointegras.ca/attac...ine=1330200098 Nothing went back on without being cleaned or painted. https://www.torontointegras.ca/attac...ine=1330200098 https://www.torontointegras.ca/attac...ine=1330200098 https://www.torontointegras.ca/attac...ine=1330200098 https://www.torontointegras.ca/attac...ine=1330200098 |
Re: Kaptain Keith's da9. The "Statement"
Its just my wifes daily. Lol
|
Re: Kaptain Keith's da9. The "Statement"
Ummm. Dont try and copy any of this unless you have been turning wrenches your whole life. I have been welding since i was 10. My old man was a mechanic RIP. This build is entirely what you know and how you know it. Befor this i built a cleam 90 crx si and i have been swappn engines in things like trucks, boats, muscle cars and machinery. There realy are no write ups on this.
Thnx for checking it out. |
Re: Kaptain Keith's da9. The "Statement"
Holy crap, this is insanity! I'm surprised so few members have posted yet. Everyone must be in shock an awe mode.
|
Re: Kaptain Keith's da9. The "Statement"
Working on plates that say "STATEMENT"
|
Re: Kaptain Keith's da9. The "Statement"
|
Re: Kaptain Keith's da9. The "Statement"
Originally Posted by gottalovetheteg
(Post 345099)
Holy crap, this is insanity! I'm surprised so few members have posted yet. Everyone must be in shock an awe mode.
|
Re: Kaptain Keith's da9. The "Statement"
Good build man like the pics. Cars looking sweet. you got some great talented when it comes to restoring this DA.
Once again great work. |
Re: Kaptain Keith's da9. The "Statement"
Thmx Paul. I still need to paint the doors, but other then that. Its almost finished. I hope to make it to a few meets this year. Honda-tech for sure...
|
Re: Kaptain Keith's da9. The "Statement"
16 Attachment(s)
SAMBA GREEN? looks very similar to my buddies samba green RHD DA
RHD DA with a buttload of JDM goodies. he digged high and low to find all these rare parts!!! must of took him 5+ years to gather everything. here is his build thread on g2ic.com link: http://forums.g2ic.com/showthread.ph...y-build-thread https://www.torontointegras.ca/attac...ine=1330317463 https://www.torontointegras.ca/attac...ine=1330317463 https://www.torontointegras.ca/attac...ine=1330317463 https://www.torontointegras.ca/attac...ine=1330317463 https://www.torontointegras.ca/attac...ine=1330317463 http://forums.g2ic.com/images/imported/2012/01/782.jpg |
Re: Kaptain Keith's da9. The "Statement"
What. I figured theres gotta be another one. You should post him a link to mine.
How did the car get that clean? Looks nice in the sun. |
Re: Kaptain Keith's da9. The "Statement"
Originally Posted by Kaptain Keith
(Post 345167)
What. I figured theres gotta be another one. You should post him a link to mine.
How did the car get that clean? Looks nice in the sun. when he bought the car, it was just a bare RHD shell w/ drum brakes in the rear, zero interior. he had to swap everything over from his parts car. everything on his ride was built from the ground up by him, other than the body and paint (he let the insurance handle that). he's actually in the process of painting his engine bay and dropping in a jdm B16. the car is that clean because he is really meticulous and pays attention to every single detail when working on his car. he's a JDM guru/fanatic. every single JDM part for that car was pieced together from everywhere and must have taken him 5+ years. he even has the JDM brown tinted rear window. he is constantly searching for those rare JDM parts. |
All times are GMT -5. The time now is 03:33 PM. |
© 2024 MH Sub I, LLC dba Internet Brands