Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Pictures and Videos (https://www.torontointegras.ca/pictures-videos-34/)
-   -   I hate rusting rotors! (https://www.torontointegras.ca/pictures-videos-34/i-hate-rusting-rotors-26401/)

KleenGiz'R 05-15-2007 06:16 PM

I hate rusting rotors!
 
5 Attachment(s)
One thing I hate the most is buying a new pair of rotors and having it rust a few months later. I got these KVR's last summer and i haven't driven my car in the rain, all the rust is just from water deposites after a car wash. Anyways i hate looking at it, so i decided i would paint the rusting rotor hub. Pictures below of this small project.

Iew
Attachment 20572


Attachment 20573

I sanded them down alittle to make it smooth
http://img.photobucket.com/albums/v4...r/IMG_3073.jpg


Precision work lol! i took the long way at doing it
Attachment 20574

Much better!
Attachment 20575

Done!
Attachment 20576


Can't wait till they dry!

HKJ 05-15-2007 06:21 PM

lol how long did it take you to mask that? i just sanded my rotors down and went crazy on them, afterwards i let my pads clean up the rotor surface :P

lazy = me.

nautica_t YO 05-15-2007 06:25 PM

^john thats what i would've done, i would've just sprayed the whole thing and use the pads to clean it off lol

FuzzyLS BRO 05-15-2007 06:31 PM

wr3d, they look alot better, i've tried to tape them up and paint them but that just takes too damn long, i find if you grab some paint (whatever you want to use), spray it into a paper cup or something, then dab one of those sponge brushes into the cup and then paint it on. so much easier and faster.

Valo666 05-15-2007 06:34 PM

LOL i was thinking about doing that on my way to work this morning.... what kinda paint did you use? i have flat black rust paint would that work?

KleenGiz'R 05-15-2007 06:40 PM


Originally Posted by HKJ (Post 169141)
lol how long did it take you to mask that? i just sanded my rotors down and went crazy on them, afterwards i let my pads clean up the rotor surface :P

lazy = me.

Lol it took me about 10mins each to mask em, I had some time to burn lol.


Originally Posted by FuzzyLS BRO (Post 169146)
wr3d, they look alot better, i've tried to tape them up and paint them but that just takes too damn long, i find if you grab some paint (whatever you want to use), spray it into a paper cup or something, then dab one of those sponge brushes into the cup and then paint it on. so much easier and faster.


that works too.. much faster then my method lol

nautica_t YO 05-15-2007 06:43 PM

tremclad paint :D

KleenGiz'R 05-15-2007 06:46 PM

i used dupri coat high heat engine paint. Flat black rust paint should work!

Buff4Prez Yo 05-15-2007 07:17 PM

I did the method john mentioned. BBQ paint works well too

1DA2NV 05-15-2007 09:16 PM

hmm i wanna do this

Buff4Prez Yo 05-16-2007 12:50 AM

^^^piece of cake. if you're really lazy you can leave the rotors on the car

esguerra 05-16-2007 05:15 AM

rotors on the car is the easiest...just wrap the surface with newspaper...if you get paint on there, oh well the pad is there to scrape that ---- off...

JDM_gsR 05-16-2007 06:39 AM

^+1

Big Hairy Gino 05-16-2007 07:39 AM

Good work! I plan on doing the same thing. I just got new rotors and its got a nice fresh coat of rust.

Smartass pHO 05-16-2007 07:44 AM

I can't believe you guys paint your rotors.

JEFFOS69 05-16-2007 07:53 AM

Painting your rotors is fine. As long as you're not using the wrong paint.

HyBrId 05-16-2007 08:58 AM

holy green tape batman!

Solid GSR YO 05-16-2007 09:00 AM

why don't you just buy the coated ones???

i painted mine as well :)

JayBRO 05-16-2007 11:09 AM

I spray my rotors right on the car... I use a silver paint that has metal flakes in it... the brakes will clean any over spray off the braking surface.

Paint with metal flakes is different then ones without and oil based... I wouldn't want to get that on my rotors.

canttx 05-16-2007 11:19 AM

nice job. what about the rears?

Infinity 05-20-2007 10:09 PM


Originally Posted by HyBrId (Post 169320)
holy green tape batman!

seriously...haha.. i just cut a circle in a peice of cardboard and sprayed the rotor

KleenGiz'R 05-23-2007 06:31 PM


Originally Posted by canttx (Post 169374)
nice job. what about the rears?

Yea, i'm going to get new rotors for the back and paint them when i get em.


All times are GMT -5. The time now is 12:44 PM.


© 2024 MH Sub I, LLC dba Internet Brands