Will 17's fit on my teggy?
 

will 17" rims fit on my integra 97?
or will my tires rub?
i want to drop my car probably around a good 1.7" front and rears. and also want to get 17" rims on my teggy but is it gonna rub if i drop it that low and put 17's on?..
and when i'm turning will it rub?

btw my tire size is going to be 205-40-17

Yes

I run 17's nice ride, but you can't go to low with them.. I am getting 16's

Currently have 17's on stock suspension. Teg looks like a 4x4 but I will be lowering it a bit this spring. It does rub when I turn the wheel a lot.

I know its a DA but it cant be that much different then yours. Im running 17's without a problem and my car is pretty low. It tucks a bit in the rear but doesnt rub.
Sorry about the pic size its all I have

Attachment 17770

wow look at that dc rice box

Your rubbing with your 17's on stock suspension?? you must have really wide tires, or a really bad offset on your wheels. I used to have 18's on my lowered integra and no rubbage at all. Proper tires and proper offset and you should have no problems with 17's

dc? j-body rice box lol.:rolleyes: I call it the transformer

He's right...that is a Cavvy! I swear I thought it was a dc as well! :lol:

LOL its clearly a cavy!! I posted up some pics of it last year with my ride.. Ugly but fast. Will be out in the spring with a northstar v8 5speed. I will post up pics of progress/completion when the time comes

so what would the proper offset be?

17's will rub on a dc but won't rub on a da. they have bigger/deeper wheel wells

:yeah:

17's wont rub if your tires are 205s im geussing.. i never rubbed once on my silver teggy. (DC4)

LOL i remember when mine was not lowered with 17's on it. I have a nice drop on it now. Wheels rub depending on your drop. But it's just plastic so who cares.

you cant lower much on those 17s. It will rub.

I've got 17's on stock suspension and I have no problems with rubbing. I'm also planning to lower the car a bit..Just not sure what I want to lower it to. Then I'll consider getting 16's as well if it becomes a problem...

i got 17 but i have monster tires they rub like a bitch be careful when u get tires cause low pros shouldnt rub

Use 1010tires.com technical specs

go read up on Offset, tread size/width

and also read up on tire comparison or use their calculator it's free.

You should be ok with 205/40/17 for sure

but it just depends on the width of the tire and especially the offset... probably 38+/- can't remember you'd better check :X

17's are to big for an integra unless your a drug dealer

^lol... +1, IMO 17's belong nowhere near an Integra.