Wanna replace RS seats with RSX seats
Hey, I got a 94 RS and I wanna replace my front seats with the ones from an RSX. Is it possible? And if it is, how do I do it?
|
It is possible. Not sure how though. I think you have around with the mounting rails and the seats. There must be a thread somewhere on Honda-tech or Team-Integra.net
|
http://www.team-integra.net/forum/di...g+Common+Topic
here's one DIY. Not impossible but hard. If you want to go the easy way, I recommend you get some Recaros, Brides or some cheap replica racing seats while you're at it. |
http://www.honda-tech.com/zerothread/1336811
Here's another one from honda-tech. See searching does not take as long as it does to start a new thread lol From just overviewing the threads, I think you have to replace the mounting brackets of the seats. Cut off from the old seats and weld them on to the new seats. DIY or get it done |
yeah i was thinking i would have to do some retrofitting
thanks alot |
How tall are you? I sat in a DC with RSX seats. I'm 5'10 and my head was 1 cm from the roof. Hope this helps with your decision.
|
might have to get the low sittin rails.. cause i kno exactly what ur were talkin about vtec
|
If your looking to get a set ready to throw in your car send me a PM. I got a set I'll be getting rid of next summer. Ready to go into any DC/EG :)
|
All times are GMT -5. The time now is 03:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands