Valvetrain and cam question
I just wanna know if it would be ok to use a different brand of retainers and valve springs with a different brand cam? For the skunk 2 Pro 1 cams they say that u need to use the skunk valvetrain kit but are they just trying to sell the kit or do I really need to get the skunk valvetrain kit?
|
you should try to use the same valve springs/retainers the cam manufacturer recommends.
but as long as you use good quality components i don't think you will have a problem. |
Originally Posted by non-VTEC
you should try to use the same valve springs/retainers the cam manufacturer recommends.
but as long as you use good quality components i don't think you will have a problem. :werd: I'd just like to add, to make sure that the max lift of the valvespring is higher/greater than the max lift of the cams your buying. |
S2P1's and OmniPower VT here. no problems at all. plus, the OP's are a snap-in retainer for added safety.
|
^^^ are you going to the honda-tech meet?
|
All times are GMT -5. The time now is 06:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands