TYPE R Tranny Help
 

Whats up everyone, Im looking to purchase a JDM B18C5 Tranny but don't know what to look for when purchasing a transmission. I know TotalJDm has one for sale buttttttt i unno about shopping there. If i do however decide to get it what should I be looking for to get a good quality tranny? I am also looking for shift linkages and all necessary hardware to replace a GSR tranny and linkages. Secondly, is it worth parting out the OEM LSD to pick up a phantom grip or Qauife LSD?

look for condition of the tranny outside and inside, outside check for cracks. inside check all the gear teeth and check bearings. you dont have to change your linkages. Lastly, yes it is worth parting it out as most integra R trannies are worn or have little life left in the lsd.. Quaife would be your best bet..

You might be better off just swapping the 4.7FD from a JDM ITR tranny and get a LSD. If you really want you could go with a 4.9FD

The only diffrence in gear ratio's is 2nd and 3rd gear.


Y20/S80 (US Integra GSR 1994-2001)
1st gear Ratio 3.23
2nd gear Ratio 1.9
3rd gear Ratio 1.36
4th gear Ratio 1.034
5th gear Ratio 0.787
Final Drive Ratio 4.4

S80 (JDM Integra Type R 1998 2001)
1st gear Ratio 3.23
2nd gear Ratio 2.105
3rd gear Ratio 1.458
4th gear Ratio 1.034
5th gear Ratio 0.787
Final Drive Ratio 4.785