Tail light?
 

I have the black euro's on my dc4 integra and my passenger side is 100% clear but my driver side is fogged on half the side. Does anyone know how I can de-fog it then seal it so no more moisture generates inside it. Let me know what you have in mind, Thanks!

open it up and by melting the glue thats holding it together then clean it then reseal it back together.. use a good heat gun .. sell at walmart for like 20 bucks or use a hair dryer/

a good heat gun is more than 20 bucks.... more like 80-100

Any way with out taking the head light out :( ?

good luck

you want to defog the light, but you don't wanna go through all that trouble of taking the light out?

well i guess you can ghetto it out and just slap a thick as layer of silicone around the whole surrounding area where it meets together.... but i would take it apart.

put it in ur oven.. and take it apart.. and clean it up... then use whatever to seal it back... and ur set

lol

seriously... thats how we took apart the tails on the TL to do the LED taillights, but yea... just put a cardboard on the bottom of the oven to catch the water... then just take it apart... be sure not to warp the plastic though.. or else you gotta buy a new cover.

have any of you guys used a heat gun for the front head lights . i got condensation comin back this winter