Split Fire??? other good engine builders, tunners in GTA
so what do people have to say about them, i got some quotes for an ls/vtech build for 2000$ and complete turbo setup including labour and tunning for 4500$ im looking for a shop to do some work on my 98 integra anybody have any other suggestions
ya somebody else said defcon but is it reasonable prices i was just about to give up on my turbo dreams but not anymore can you beat that 4500$ costum turbo setup, install and dyno tunning, im going to call break the needle and defcon too and see what they say. tekno tik would be great but they were offering me 4000 at least for just the turbo kit. i need that balence between amazing work and reasonable prices
ya somebody else said defcon but is it reasonable prices i was just about to give up on my turbo dreams but not anymore can you beat that 4500$ costum turbo setup, install and dyno tunning, im going to call break the needle and defcon too and see what they say. tekno tik would be great but they were offering me 4000 at least for just the turbo kit. i need that balence between amazing work and reasonable prices
There's plenty to do outside my room but I choose not to!
iTrader: (5)
Joined: Apr 2009
Posts: 5,142
From: Burlington
Never cheap out when building a engine or doing a turbo set up. Just like most other people have said, you will regret it when your engine blows up from it not being built like it should be for boost. Go to defcon, i have had many friends get there swaps down from them, and they have never had a problem with it.
no man i just want to know what it is why are they disliked by u and a few other ppl they even built the fastest fwd car in the world really im just planning on buying a turbo kit installing myself and getting tekno tik to tune it
cause its his car thats y n he had sponsors. for me it was bad tuning n bad machanic work, also dented my car while it was there. other ppl has told that he swap out ur good parts for ---- ones. if u want to buy a turbo kit n install yourself, why r u going there?!! u said u want turbo n install by shop. do u know what u want?????
me and all my friends get whatever we need done a defcon, you pay for what you get, they only deal with quality parts and they do a good job. They saved me money where they could but were straight with me when i needed to spend some cash. go defcon/a.r.t.
ok i talked to defcon k so i say i am looking to turbo my 98 integra i asked for a ball park estimate when its all said and done they told me 7000, they said if u want cheeze then we really dont do that but heres my question is there anything in between. im not building a competition race car just want some boost for some dd fun. im going to talk to tekno tik but am leaning on buying a peakboost kit for 3000$ thats an example of an overall good setup for the money.
Depends on your goals and over-all budget. Do you really want to sink that much cash into a 10+ yr old car?
For 7G's you can buy a 240sx with an S14 Silvia swapped into it, thats already fully tuned and nicely modded. This would be more reliable and and waaay more fun.
For 7G's you can buy a 240sx with an S14 Silvia swapped into it, thats already fully tuned and nicely modded. This would be more reliable and and waaay more fun.
i never dealt with split fire before but just for the fact that they quoted you 4500 for a complete engine build including turbo setup and dyno tune is just stupid......i never been there before and i will never go there.
you can try calling up tony at dynamotorsports...he is not cheap but you will get qualitly work/parts/tuning at his shop. http://www.dynamotorsports.ca/
you can try calling up tony at dynamotorsports...he is not cheap but you will get qualitly work/parts/tuning at his shop. http://www.dynamotorsports.ca/
ok so i go into splitfire myself and they deff sound scetchy, the guy doesnt even tell me what exactly is going in my car, he only says its a percision turbo, why thankyou that helps a lot. i dont get how hes been in buisness for 20 years, builds the fastest fwd car in canada and he said he garenties his work such as cracks. btw I am not going to splitfire
you made a good choice with splitfire ive heard hes a pretty good scammer when it comes to parts and leaving ur vehicle there so thumbs up on that decision but i do believe u get what u pay for so if waiting some time and saving up more money will ensure u a proper build then i say wait
Just as a reference point, I have personally seen full weight 1G AWD's (3300lbs) running mid to high 12's on a 14b.
With the 14b on even a SOHC the boost/power will start to fall off early, like roughly 6000rpms. This is because the turbo is falling out of its efficiency range on these engines at that rpm.
I personally would go with a t3/t4 50 or 57 trim with a .50 or .60 a/r for a LSvtec. Or something like a gt30 or gt35r.
I've made 315whp 225wtq @ 11psi with a t3/t4 57 trim .50 a/r on a bone stock LSvtec. Literally all this engine had was ARP head studs and a 2.5" exhaust
Try DL Motorsports in Burlington for Honda building/Tuning.
Also Mississauga for engine building only. He knows his stuff and builds many high performance race engines however........ he is never done on time...
so expect several calls to get motor done.... again work is good.
Also Mississauga for engine building only. He knows his stuff and builds many high performance race engines however........ he is never done on time...
so expect several calls to get motor done.... again work is good.
mike at dl motors in burlington is a scammer to my buddie is going through a law suit with him because he is trying to screw my buddy on paying bigtime for work he did and he fucked up his car and was late and was lieing about how long it took him and what he actually did...i would not recomend him
[QUOTE=mksliao;278013]the best jap cars to work on are from 1990 to 2001 especially honda specific cars so most will be 10 years old or older so really how old the car is would be irrelevant



