stock ls 96 integra
10-02-2011, 09:28 PM
#1
n00b
Thread Starter
Join Date: Apr 2011
Location: Cambridge
Posts: 12
stock ls 96 integra
so my car died couple months ago havent bothered to fix it,
my clutch broke so i got a new clutch, i got a 300$ stage 3 clutch brand new it was cheaper than a stage 1 so i got it.
couple months later my car completely ***** up all the gears i have now are 4 - 5 im thinking my tranny broke and i may have to replace it any tips?
yeah ik the stage 3 was a overkill and pulls way to hard for the motor but im not sure whats broken any tips before i start ripping apart my tranny?
my clutch broke so i got a new clutch, i got a 300$ stage 3 clutch brand new it was cheaper than a stage 1 so i got it.
couple months later my car completely ***** up all the gears i have now are 4 - 5 im thinking my tranny broke and i may have to replace it any tips?
yeah ik the stage 3 was a overkill and pulls way to hard for the motor but im not sure whats broken any tips before i start ripping apart my tranny?
?
10-03-2011, 01:56 AM
#3
Re: stock ls 96 integra
I dont see the clutch damaging the transmission. With the car off, can you shift through the gears? also Do you have any fluid in the clutch master cylinder? maybe you have a leak thus not being able to shift properly.
What exactly happens when you try to put it in gear? and did this happen all at once or was it gradual?
What exactly happens when you try to put it in gear? and did this happen all at once or was it gradual?
10-03-2011, 01:16 PM
#4
n00b
Thread Starter
Join Date: Apr 2011
Location: Cambridge
Posts: 12
Re: stock ls 96 integra
with the car off i cannot change gears it seems to be blocked except for a few i only have 4th gear and 5th gear so i can only use those and they are awkwardly placed like its not to the far right its to the left i know for sure that i needed my gears alligned or however u call it i have yet to take apart the car to look at the master cylinder i just needed some tips before i start to look
when i try to put it into first gear ( to the left and top right) it wants to move forward but it doesnt i rev it really high and try and drop the clutch but it just creeps forward and moves back to where it started its basicly feels like i have the e brake on. i think that my tranny is fucked but who knows could be something else because it seems like Reverse 1st 2nd and 3rd are put together? if you get what i mean.
when i try to put it into first gear ( to the left and top right) it wants to move forward but it doesnt i rev it really high and try and drop the clutch but it just creeps forward and moves back to where it started its basicly feels like i have the e brake on. i think that my tranny is fucked but who knows could be something else because it seems like Reverse 1st 2nd and 3rd are put together? if you get what i mean.
10-03-2011, 09:03 PM
#6
n00b
Thread Starter
Join Date: Apr 2011
Location: Cambridge
Posts: 12
Re: stock ls 96 integra
quick update im going to begin to start checking everything including transmission fluid it could be something as simple as that because the gears are not smoth at all they shift into gear now i just tried it couple of hours ago and it seems to be going in but with a lot of force and im going to check my linkage. ill post an update thursday, pretty sure someone has had or will have the problem in the future 
10-09-2011, 05:47 PM
#7
n00b
Join Date: Oct 2011
Location: Cambridge ON
Posts: 12
Re: stock ls 96 integra
quick update im going to begin to start checking everything including transmission fluid it could be something as simple as that because the gears are not smoth at all they shift into gear now i just tried it couple of hours ago and it seems to be going in but with a lot of force and im going to check my linkage. ill post an update thursday, pretty sure someone has had or will have the problem in the future
Thread
Thread Starter
Forum
Replies
Last Post
killahcam
Integra Parts For Sale
0
09-16-2011 05:00 PM
snipes6945
Integra Technical Questions and Tips
10
05-03-2010 06:22 PM