Rims Question
 

What is the ideal size rims for an 94 integra.

I'm thinkin' of get 17's but what off-set should i be lookin for? and they should be 4x? i'm seein' a lot of 4x100 and 4x114 what is that about?

thanks for the help

They have to be 4x100, and the centrebore has to be 56.1mm or greater. I'll let the others comment on width and offset......

width: nothing greater then 7.5
Offset: 32 - 44

TireSize Calculator
Use this to plug different profiles/widths to get what you want.

--- err, nevermind... thought you were looking for tires.

17s are a bit showy and create an increased rotational mass for a serious performance increases. If that's what you're into then they're fine. Performance wise the best thing to do is go as small as your brakes would allow. A lot of guys have success with 14X7s. They're hard to find, but they do shorten your gear ratios and improve accelleration. If you can fit 13s than even better. They're not very bling, but do perform better.

Most people on here will say 16s and a good drop yields the best look/performance combination.

Sorry, thats 16x6.5, or 16x7 with 4x100 bolt pattern.

Your rims are 4X100. 4X114 are accords and 4-bolt prelude. I think tegs have a 38 offset but I'm not 100%.

my stock rims were 15x6.5 with a 45mm offset... 38's got a good lip to it, and you wont find it stock on an Integra.