replacing bushings
 

so i bought a front camber kit for my 01 LS cause one of my balljoints is shot and im tryin to get the car ready for the snow and i dont want my suspension lacking. play in the wheel = bad in the snow.

but im curious. when i go to take my stock UCAs off are the bushings pressed into the UCA or not?

their are no bushings in the uca.

...ya i called a dealer and they told me the bushings come already in the UCA...

they ment the balljoint comes already in the uca.

oh...so there isnt anything in-between the two forks at the end of the wishbone?

yes,a bushing and the bolt. that is the LCA.

i work better with pictures haha. see theres bushings in that UCA there

edit: looking at this pic it looks like you just undo the 14mm bolt/nut and those bushings will pop right out?

http://www.team-integra.net/images/B...t/IM001170.jpg

oh snap.my bad.

sall good. but they do look just bolted into the forks not pressed. google is being useless for me and only giving sites where i can buy bushings from...

what camber kit did you get? my S2 kit came with the anchors.

those have to pressed in to the anchors. i have those bushings if you need them.

Blox kit from Option. called em and they said that it didnt come with the bushings. found an article on team integras...ill edit this post and put it up.

http://www.team-integra.net/sections...?ArticleID=909

ok so it was the anchor bolt that i was refering to. if the bushings are punched tho i will be in touch with you

there bolted in you can use the stock ones