people with koni yellows help me out
 

i have koni yellows on my car with H&R race springs, it's a 2000 integra se with the stock 14" rims, right now im on the highest perch thingy (thers 3 i think?) i was wondering if i can go lower with out rubbing??
http://mycar4

yesh

im on koni yellows and type r springs. and im on 14" and the konis are set in the middle perch. now i dont know exactly what the drop is with the type rs but i have 2 finger wheel gap in the front and 2 fingers in the back. i know that is not a very technical way of describing the gap but yeah...

so in short middle perch, type r springs = 2 finger wheel gap lol

you will not rub

just checked and in the front i have 1 finger gap and in the back i have 2.

it's pretty close - i was on H&R sports and koni yellows - stock 15" wheels 195/55 tires and i rubbed.... it didn't seem like it at first but when i jacked the car up, you could see where the tires rubbed the lining on the front wheel well

would the 15's make me lower? im on 14's now (stock SE rims)

I've tried all 3 settings, 1 perch it too high (looks like 4x4), 3 perch is too low (rubs)

Middle perch on 17's with neuspeed race springs, one finger gap, no rubbing, perfect

slammed on 15's coilovers almost bottomed out, koni yellows on lowest perch, no rubbing here.

I dont know how you guys rub with fairly suttle drops. I have 205/40 16s tucking tires in front and back and have no rubbing issues at all.

i think my springs may have been too soft...h&r sports.