Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Need Help!!! Asap (https://www.torontointegras.ca/integra-technical-questions-tips-35/need-help-asap-31809/)

pnoy21 04-07-2008 11:51 AM

Need Help!!! Asap
 
i got a queztion meng... my car wont start nd i jst put new ignition wires nd spark plugz but i hve spark n d wirez .. i got gas too nd i jst put a new distributor on ... i hve a stock b20 engine on my 1991 acura integra gs ... i tried jump startin it too... it crankz but still wont work ... sombody told me dat it myt b an ecu problem but i think ive tried everythang dat I cud possibly do to start it but it still wont start .... can sombody help me out hre plz nd thank you

Smartass pHO 04-07-2008 12:05 PM

I have no idea what you just said. Can you please rephrase your post in proper english?

mkmk 04-07-2008 12:15 PM


Originally Posted by pnoy21 (Post 211879)
i got a queztion meng... my car wont start nd i jst put new ignition wires nd spark plugz but i hve spark n d wirez .. i got gas too nd i jst put a new distributor on ... i hve a stock b20 engine on my 1991 acura integra gs ... i tried jump startin it too... it crankz but still wont work ... sombody told me dat it myt b an ecu problem but i think ive tried everythang dat I cud possibly do to start it but it still wont start .... can sombody help me out hre plz nd thank you

he said...his car is having a problem with start up...
he has recently replaced the spark plugs and the ignition wires..and still has his old once i believe...
he also changed the distributor...he has a b20 motor on his integra....he has gas and everything but it still won't power up...
some one told him he may have a ECU problem...he tried all he could but still not working...


that's pretty much what he wanted to say...

i think it also maybe the ECU...did you change the motor recently?...was it working like day before it shut off?...like if you just did a motor sway..and tried to turn on the car..i think it may have been the ECU i think it uses a different Ecu..i could be wrong..:confused:

pnoy21 04-07-2008 01:24 PM

thank you ... no i didnt do d swap by myself... wen i got d car d engine came wit it swap already .... and d car was workin fine for 2 yrz... nd wut happend was i wuz driving home and i wuz in 3rd gear nd den d rpm jst went down nd den after dat d engine light turned on ... and d nxt day i some1 told me dat itz prolly jst my distributor nd i chekd it nd d magnet inside d distributor is split in half already so i bought a new wun nd put it on but ... i tried startin it .... it jst crankz but wont power up so can dis really b an ECU problem??

ls/vtec 04-07-2008 02:05 PM

Could be your fuel pump even though you checked if its getting fuel it can still be the fuel pump not cranking out what it should. I had the same problem on my first integra and I narrowed it down to the fuel pump I changed it with an extra one I had and it worked and never had a problem after that

Buff4Prez Yo 04-07-2008 02:05 PM

check to see if you're getting spark.

NOFEAR 04-07-2008 02:42 PM

Starter? Battery Could be simple little things.

ls/vtec 04-07-2008 02:44 PM

If it was the starter it would just make a clicking noise it wouldn't cause that

pnoy21 04-07-2008 06:00 PM

ye i have spark .... so even though im getting fuel from the filter going to the rail does it still mean that it could be the fuel pump??... starter?? i dont think so because its cranking loud ... cud it be the starter as well??

slvr_dc2 04-08-2008 03:08 PM

Definately the ECU...Doesn't sound like it has a brain...missing all kinds of vowels and everything.

pnoy21 04-08-2008 09:43 PM

but it was working fine before when i first got the car with the engine swap already.... but if it is the ECU how do u check if its like ... not workin?? do u have to use a DMM to check it or what??

sikkkkktegra 04-08-2008 09:58 PM

oh man, where the hell do u learn to type like that.. you just made my brain hurt reading all that..

check color of your spark. check to see if fuel pump is priming. check your main relay. check your ecu. if its flashing an engine lights check to see the code. check condition of wires.

richie 04-08-2008 10:01 PM

check the fireing order on the spark plugs

pnoy21 04-13-2008 05:44 PM

wutchu mean by d color of d spark?? wut color should it be?? nd wer can i find d MAIN RELAY ... ??? .... firing order of d spark plugz iz ryt still wont fire up though

D C 2 04-13-2008 07:58 PM

^ Don't mean to bash the thread or anything and neither am I hating on you lol. But, just type in proper English. Not that hard :) I assume you're a high school kid?

Here's the automatic transalation guys:


Originally Posted by pnoy21 (Post 213892)
wutchu mean by d color of d spark?? wut color should it be?? nd wer can i find d MAIN RELAY ... ??? .... firing order of d spark plugz iz ryt still wont fire up though

What do you mean by the colour of the spark?? What colour should it be? And where can I find the Main Relay ?? Firing order of the spark plugs is right and will not fire up though


P.S. : There's other people out here that do not understand the whole slang business. Make your statements understandable for everyone. That way you will have a wide variety of people helping you out instead.

thusee 04-13-2008 08:32 PM

could also be a defective distributor happend to me to i swapped in a new distributor and car jus shut off on me while driving so i put the old back on and it fired up right away

sikkkkktegra 04-13-2008 08:41 PM

colour of the spark determines how strong the spark is. you could have spark but it could be as weak as a 90 year old man trying to have a boner.

main relay is under steering wheel

check if your receiving fuel to the fuel rail.

DJINFERNO806 04-13-2008 09:04 PM


Originally Posted by sikkkkktegra (Post 213930)
spark but it could be as weak as a 90 year old man trying to have a boner.


i thought viagra fixes that ----!!

DOHCnoTEC 04-13-2008 10:30 PM

first go grab some quick start or small amount of fuel. pull intake tube off and get someone to crank it and either spray some quick start in it or fuel.(basically priming the car) see if it kicks over if not check the firing order you might have mixed em up, or could be faulty distributer. if it does kick over then you got a fuel problem. check the main relay to see if its sticking or if someone has a working one slap it in and if she goes its all good if not then most likely the fuel pump.

you can even get someone to crank it over and you laydown and smack the fuel tank with a hammer or mallet. sometime it might kick over.

hope all goes well man.

oh main relay is usually under dash on driverside.

Rrebel YO 04-14-2008 12:24 AM


Originally Posted by pnoy21 (Post 211879)
i got a queztion meng... my car wont start nd i jst put new ignition wires nd spark plugz but i hve spark n d wirez .. i got gas too nd i jst put a new distributor on ... i hve a stock b20 engine on my 1991 acura integra gs ... i tried jump startin it too... it crankz but still wont work ... sombody told me dat it myt b an ecu problem but i think ive tried everythang dat I cud possibly do to start it but it still wont start .... can sombody help me out hre plz nd thank you

WTF? in english please :jeez:

Rrebel YO 04-14-2008 12:40 AM


Originally Posted by pnoy21 (Post 211923)
Thank you. No I didn't do the swap by myself. When I got the car the engine came with it swapped already and the car was working fine for 2 years prior. What happened was, I was driving home in third gear and then the rpm just went down and then after that the engine light turned on. The next day someone told me that it's probably just my distributor and I checked it and the magnet inside the distributor was split in half already, so I bought a new one and put it on. I tried starting it, but it just cranks. It won't power up, so can this really be an ECU problem??

Wow, it feels like i'm in grade one all over again :lol:

Seriously people, take some english courses and stay off MSN!

tsquared 04-14-2008 12:49 AM


Originally Posted by Rrebel YO (Post 213991)
Wow, it feels like i'm in grade one all over again :lol:

Seriously people, take some english courses and stay off MSN!

lol. dont be so mean. not everyone types in proper case statements. but i definetly see what you mean. What i dont understand is, why is he adding extra letters. like "i got a queztion meng" has more characters then "i got a question man". lol

DJINFERNO806 04-14-2008 07:41 AM

because kids nowadays are too busy ------- around and not going to school to learn proper english and parents dont do ---- all... i got beats galore when i was growing up I actually made it to univ :O.....

Rrebel YO 04-14-2008 02:35 PM


Originally Posted by DJINFERNO806 (Post 214014)
because kids nowadays are too busy ------- around and not going to school to learn proper english and parents dont do ---- all... i got beats galore when i was growing up I actually made it to univ :O.....

Well said. I just figure that if you're going to be a part of society at least learn how to write the ------- language out properly so others can understand. It's not too much to ask.

DJINFERNO806 04-14-2008 05:29 PM


Originally Posted by Rrebel YO (Post 214066)
Well said. I just figure that if you're going to be a part of society at least learn how to write the ------- language out properly so others can understand. It's not too much to ask.


well i can understand talking like that BU HOW DA FUK WULDA TINK IF I SPLED LIKE DIS???? honestly id take dislexia(reading disorder) ANY DAY over talking like a got a potato in my mouth.... HEY KIDS GET OFF MSN AND GO TO SCHOOL!!!!

pnoy21 04-14-2008 08:11 PM

ok ok people no need to be harsh and all my apologies for my language. and thank you for all the tips that i need to know and I'm going to try them all of them tomorrow if it doesn't work ill probably be back here. again

sikkkkktegra 04-14-2008 08:32 PM

Zomg Hez Cyan Type Properlies mang

Rrebel YO 04-14-2008 09:15 PM


Originally Posted by pnoy21 (Post 214134)
ok ok people no need to be harsh and all my apologies for my language. and thank you for all the tips that i need to know and I'm going to try them all of them tomorrow if it doesn't work ill probably be back here. again

A new man! :yeah:

A+

pnoy21 04-17-2008 01:54 PM

alright guys im back AGAIN. all the tips that you guys gave me didnt work ive tried everything and today im going to try to take out the starter and check if the solenoid is ok if not that could be the problem right? i want to change the fuel pump but its too expensive. do any of you guys know where i can get a cheap fuel pump?? i live in malton mississauga im near etobicoke as well so if you guys know a place near here where i can get a cheap fuel pump that would be a great help! =D

sikkkkktegra 04-17-2008 02:56 PM

i got a 190 walbro pump for sale 60 bucks.. let me know.

pnoy21 04-19-2008 08:06 PM

is that a fuel pump? sorry im kinda new in this society thing.

Jsal 04-20-2008 10:00 PM

Well you should learn to speak proper english before you fix your car

http://www.englishclub.com/

sikkkkktegra 04-20-2008 10:52 PM

yes thats a fuel pump.. 60 bucks man, perfect working order.. pm me.

pnoy21 04-21-2008 10:03 AM

alright next week men ill message you because thats the time im getting paid thank you though

DJINFERNO806 04-21-2008 10:12 AM


Originally Posted by Jsal (Post 215456)
Well you should learn to speak proper english before you fix your car

http://www.englishclub.com/


wow must be that time of the month already.....

pnoy21 04-27-2008 11:40 AM

HA! guys i found out what was wrong with my car. it wasnt even the fuel pump or anything but its the valve timing =D and now i just need to buy a bearing for the exhaust camshaft because thats the one that is skipping a teeth thank you for all your help though=D


All times are GMT -5. The time now is 03:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands