need help!
 

my speed settings for my climate control does not work... everything else does on the climate control, heat or cold works, where i want it to blow works, outside or inside air works but the speed level of 1-4 for the fan doesnt.. what could it be?

also i need someone with locks to take of my lock nutt which i lost the key during winter!, need someone to take em off for me..

your heater resistor is toast not sure where it's located on a G3 but on a g2 it's either somewhere under the dash near the glove box or in the passenger kick panel.

as for your wheel locks, get a set of those nut removers for rounded off nuts.

werd on the resistors being done

bump i confirmed with my buddy it is the resistor box! thanks buff. as for the lock nutt key i still need help, its one of those with the flat surface with a hex like looking thing in the middle and round edges. i cant take the bolt remover to take it off. should i weld on a nutt and try to pry em off.?

there is a special snap-on tool for taking the locknuts off, i think you can get them at cdn tire. otherwise most mechanics will have the tool you need to get them off

you can always do it the old school style and sacrifice a socket =)

you get a socket that is just a little bigger then the locknut... smash it inthere with either a mallet or a big hammer... and then just rachet it off .. one of the tips i got from my dad ( he's an ex mechanic )

Air hammer. Sacrifice the nut, not the tools

haha remind u of something pri?