Motor Mounts.
 

I will be dropping in a b18c5 spec 98 into my car shortly and i was wondering what would be the best motor mounts to put in...or leave the stock ones and work with them such as inserts. Would these be fine to put in since the price is cheaper then where i have been looking. The only thing is it says gsr and ls which i dont think matters.
Any ideas?
BUYHARDRACE.COM - HARDRACE PRODUCTS

Comments are appreciated.

I'd just run the stock mounts for now, or buy a nice set of polyurethane mounts, it will stop more of the vibration from the engine, just the only down fall is that you will feel it in the hole car more, and if you put in solid mounts, well, your just nuts for doing that on a street car. Any mount that has a harder rubber then the OEM one's, you will feel it more.

I heard that the polyurthane mounts cause more of a vibration and you feel more inside the car...which i do not want since this will be a daily driven car...the site says these reduce the vibration and act like the oem ones... thanks for the comment Spike i will keep it in mind. I have to see the condition of mine when the motor comes out. More comments appreciated.

Those mounts will still get you some vibration from the, as they are reinforced, for no vibration, just get another set of OEM one's, they are designed to handle it no problem.

Thanks alot spike im might just end up using my stock ones..and if they are bad just replacing them.