Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Loud knocking noise+squeek (https://www.torontointegras.ca/integra-technical-questions-tips-35/loud-knocking-noise-squeek-42057/)

JDM_overdose Apr 15, 2010 01:04 PM

Loud knocking noise+squeek
 
When I let off the gas there is a very loud knocking noise.

I have the T mount on in the back of the engine, but not bolted. Thats somthing we forgot to do durring the swap.

Could that be the problem

------------------------------------------------------


Also on another matter, when im turning(only when im backing out or pulling out), the front wheels squeek. What could that be.

Thank you

1goodyr Apr 15, 2010 01:06 PM

Could be CV boot for the turning, depending on the noise? are you sure its not like a knocking noise?

JDM_overdose Apr 15, 2010 01:07 PM

no its a squeek.

nizmo Apr 15, 2010 02:29 PM

yup. when your engine is under load it will roack back and forth when your on or off the gas. so that mount is knocking ur sub-frame/underbody.

as for the squeaking....does it go away when your driving? and is it a slow roll that it happens? or is speed a factor?

JDM_overdose Apr 15, 2010 02:53 PM

It only squeeks when im backing up and pulling out. not when im going fast

Spike Apr 15, 2010 05:38 PM

Yeah that's the mount making that noise.

JDM_overdose Apr 15, 2010 05:38 PM

What about the squeaking, Jason.

irsdb7 Apr 15, 2010 05:52 PM

how hard would it be to replace/fix that rear mount cus i have the same problem
either the mount is done or its not bolted in i think its not bolted..

if i were to jack/support up the motor and loosen the rest of the mounts would i be able to get enough room to get at it from underneath? or.. how would be the best way to do this?

JDM_overdose Apr 15, 2010 05:56 PM

From underneith is the best way. And i have one for your car if you need one. its at my house though, not my partout car.

JDM_overdose Apr 25, 2010 08:33 PM

bump.

whats the squeaking noise

Burfy Apr 25, 2010 10:57 PM

Your power steering belt you never tightened properly lol.. Honda has a speed sensor for the pump, more load is applied to the pump at slow speeds therefore your belt slips.At high speed the pump does little work so it doesn't make the belt slip

JDM_overdose Apr 25, 2010 11:19 PM

Its on properly

JDM_overdose Apr 27, 2010 11:37 AM

Well, the loud knocking noise wasnt the engine mount. It was the wheel. the lug nuts wernt tightened properly.

Story
-------

This guy came over to look at my cf hood. He said he has 100$ and his OEM mint black hood. So i said ok lets trade. Guy comes down from brampton, i look at the hood and there is rust in each corner. So i said i dont want this ------- ----. He said well ill give you 200$ plus my hood. So I said hold on let me get my phone because another guy wants to buy it for 300 without trading his hood. I go inside to get my phone, then I come out, he has my tire iron in his hand. Im like wtf are u doing. Hes like, oh i have the same one so i wanted to see it. im like w.e i dont care.(deal didnt go down, i told him to gtfo) So yesterday I put my GP Racing rims and swapped out my winter steelies. I take it for a spin today, and the knock is gone.

So when I was taking off my winter rims. the front drivers side lug nuts came off really easy, I didnt think of anything because I was anxious to get my new rims on.

So the little fucker loosened up my lugs. I drive the car everyday around the block to get the fluids going. I coulda caused some serious damage, not to the car, but to the kids playing on the sidewalk.

I have his address aswell. Ill be seeing him soon. And I know your reading this punk:)

nizmo Apr 27, 2010 04:48 PM

If thats what he did...i will gladly give him my address so he can come and get his teeth knocked out. Worthless pile of garbage....

JDM_overdose Apr 27, 2010 05:08 PM

Good thing i didnt have my GP rims on, or he woulda scratched them

AcuratePaul Apr 28, 2010 04:08 PM

---- that little prick make sure he did it...dont assume anything right away even thou the evidence was pretty clear lol.

My Teacher always said this "don't assume...you make an ass of u and me." lol assume spilt up.

JDM_overdose May 3, 2010 10:47 AM

bump

nobody knows why its squeaking...


All times are GMT -5. The time now is 12:19 AM.


© 2026 MH Sub I, LLC dba Internet Brands