Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Loose lugs (https://www.torontointegras.ca/integra-technical-questions-tips-35/loose-lugs-27530/)

BIDZGSR 07-06-2007 12:57 PM

Loose lugs
 
Im driving to an interview and my car starts rattling with a very strong vibration

i pull over and my lug nuts are loose as hell

the lugs were torqued enough recently


any ideas?

Speed King 07-06-2007 02:07 PM

tighten them before they fall off.

bbTeg 07-06-2007 04:35 PM

have you used them in the past with no issues on the same wheels? Did you use a torque wrench to tighten them down???

My bet is the seats are different than what the wheels require.

BIDZGSR 07-07-2007 10:46 AM

first time i've used these lugs... i think i need the longer ones... cus these dont seem to be holding alot of thread


u guys know any places?

bbTeg 07-07-2007 04:22 PM


Originally Posted by BIDZGSR (Post 178830)
first time i've used these lugs... i think i need the longer ones... cus these dont seem to be holding alot of thread


u guys know any places?

if they're not long enough, with them fully tightened you would be able to wiggle the wheel slightly.

I am still betting the seats are different.

Go here and read

http://www.fastco.ca/pages/extrasindex.html

BIDZGSR 07-07-2007 05:35 PM

i picked up another set today

little bit longer... the wheels sit fine and remain tightened
hopefully everything will be good

thanks for the advice bbTeg

timelessmillenium 07-10-2007 05:04 PM

Yes
 

Originally Posted by Speed King (Post 178750)
tighten them before they fall off.

Funniest thing I've read in a week


All times are GMT -5. The time now is 12:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands