LCA problems
 

ok, i just got a set of skunk2 lca's after putting in the coilovers and everything, and of course i'm running into problems with seized bushings and bolt on the old control arms.

now i was just wondering if anyone knows the size of the bolts used to hold on the control arm and the sway bar to the control arm. i'm not worried about the bolt holding the shock, as i have already replaced that.

and where would i get them?

thanks

Just go to Honda or a used JDM parts place and ask for the bolts. I got the ones i needed for like 5 bucks

looked it up in the service manual, for the end links to the sway bar its 8x1.25 bolt, and end link to LCA is 10x1.25
You can order them from Acura. it cant be much. probably 2$ a bolt if not less.

okay found the ones i need. grade 8 ten mill by 90mm for the control arms and 1.25 thread by 60mm for the sway bar. thanks guys!!