JDM conversion NEED HELP
 

Does anyone have the link on the "how to" do the jdm conversion with wiring diagram and pics ?


edit: does anyone know what supports the jdm bumper in place and where i could get this piece

dun bother its not unique anymore...... lol i kid we can never have enough JDM fronts! wiring is easy to figure out, when are u plannin on doin this??

team-integra.net should have a write up on it.

thanks buff, probably this week then off to paint shop for the next 3 weeks.

Recommendation: Go to DaveYo from Addicted Performance. I got my front done from him. No problems at all. Everything properly aligned. Unless you're a professional at body work, don't even bother doing it yourself.

you could do it yourself! just drill out the spot welds and grind off whats not needed on yours.. then put yours on and tac it on.

Its a lot more work then i thought, but i m definitely doing it myself

you need a good day just to remove old rad support and fit yours in to make sure verything lines up.. next day assembly. did it on a couple cars already..

For the JDM headlight:
1.the turn signals from the USDM/CDM headlight fit right in the socket
2.the 9006 headlights from USDM/CDM headlight fit right in the socket
3.splice the turn signal wires to run to the side markers
4.buy the password jdm wire harness for the headlight (or you can buy my extra harness hehe) plug that into your high beams-no splicing! *remember to hook up the ground wire on the harness
5.foglights you need a wiring harness from an EK, or some ebay set-up, and of course a switch.

For the JDM front you have to grind off a bit off material from the front frame where the headlights sit. Some of the write ups floating around have pictures of this.

Good luck!

Some link I found:

http://www.angelfire.com/sc3/nguyen/JDMFEC.htm

thanks a lot jasonjai, i am almost done WOW i will NEVER do it again SOOOOOO much work its crazy how much do you want for your harness pm me and let me know.

Does anyone know where i could get a bumper support for jdm clip and how much it would roughly cost ?????

Try --------. They can order one for you from Password JDM or other vendors if they don't have it in stock. It should cost you roughly around $100 to 140.

Ninja Edit: You can order one from Password JDM as well but you will get raped with customs. -------- is your only option. You can even try Option JDM. Open up the 411 online directory and look for Japanese wreckers if the first two options fail.

thanks dude, didnt do my research, put the jdm together and bumper is not being supported by anything , i m gonna give teknotic a shout asap.

here is the link to a bumper support
http://shop1.jdmtheory.com/product_i...7f5da8f4b006f4