JDM B18C into 98 Civic Si
 

JDM b18c (obd2a) going into a 98 civic ex (obd2a) using the JDM p72 ecu.

http://site.hamotorsports.com/b18c1-vacuum-diagram

I just have a couple questions..

Is there a cruise control vacuum port somewhere on the intake manifold? If so, where is it?

There was a loose tube hanging from the hook-shaped port on top of the intake manifold. I took it out and hooked my brake booster vacuum line to it. Is this correct?

Thanks in advance!!

Yes you connected the brake booster. The only big bung on there is for brake booster.

For cruise control, I believe integra engines didn't have vacuum operated cruise control, so could just splice into virtually any vacuum line on intake manifold and tap the cruise control unit in.

alright thanks!! i'm just not gonna use CC at all.

now the car starts for 2 seconds then dies. if you've got any ideas, you can find the full details here: https://www.torontointegras.ca/integra-technical-questions-tips-35/b18c-runs-2-seconds-then-dies-44083/