help with power steering belt
whats going on guys. i just picked up a 90 RS off of another member on TI and i need some help. Calling out Fuzzy, Trenell, and all the installation guru's. i need to put on the power steering belt on the car. when i bought it the previous owner took it off and got a new one but did not put it back on. If any of you guys can save me the time and money of going to a mechanic to get it done and put it on for me, it would be really appreciated. once again thanks alot guys
|
was this the one for 1250? if it is he has a p/s line leak thats why the belt is off
|
it's the easiest belt to change i can't explain it but i know i can do it
|
Originally Posted by boost obsessed
was this the one for 1250? if it is he has a p/s line leak thats why the belt is off
|
Azar..give the TI installation crew a few hours to respond back...these guys are still sleeping...:s
|
hey dude,
where are you located? I can help. |
Originally Posted by PrincessIntegra
Azar..give the TI installation crew a few hours to respond back...these guys are still sleeping...:s
You help us, we help you. end of story. ps. team-integra.net has all the info you need. maybe you should start there. this is www torontointegraswejustliketittiesandassandsometimes sellstuff .com |
Originally Posted by high-octane
hey dude,
where are you located? I can help. |
on the power steering pump, there is a wing nut, take the wing nuff off then the power steering pump should drop..once its dropped u can removed the belt and put on the new one.
|
Originally Posted by Platinum Playa
on the power steering pump, there is a wing nut, take the wing nuff off then the power steering pump should drop..once its dropped u can removed the belt and put on the new one.
You have to move the ac belt first. :yeah: |
2 12 mil bolts you need to loosen on the exhaust manifold side of the pump, and then loosen the wing nut. you'll either have a wingnut or a long 10 mil bolt.put the new belt on and tighten the wingnut(or 10 mil bolt) untill there is tension on the belt. tighten the 2 12 mil bolts on the side of the pump
if you have ac you need to remove the ac belt first by loosening the ac tensioner if this takes you any more than 10-15 mins to do go put on a apron and start baking cookies good luck |
All times are GMT -5. The time now is 06:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands