Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Heeeellllppp!!!!!

Thread Tools
 
Search this Thread
 
Old Mar 22, 2008 | 07:38 PM
  #1  
SiR_SMok3_AloT's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2007
Posts: 192
From: Toronto
Default Heeeellllppp!!!!!

Ok so i swapped my old front for a 98 -01. But one of my lense is on an angle (pointing down) so the light looks dim. any one know how i can change the angle without having to take the bumper off?
Old Mar 22, 2008 | 08:04 PM
  #2  
STRTLGL's Avatar
Member
 
Joined: Jun 2005
Posts: 854
From: Driver's Seat
Default

You wanna say you have a lazy light?
Old Mar 22, 2008 | 08:08 PM
  #3  
SiR_SMok3_AloT's Avatar
Thread Starter
Junior Member
 
Joined: Oct 2007
Posts: 192
From: Toronto
Default

yea... very lazy
Old Mar 23, 2008 | 03:32 PM
  #4  
autotechStar's Avatar
n00b
 
Joined: May 2007
Posts: 23
From: Mississauga
Default

If one of your headlight is off then you might need to re align your head lights... Or could have been already like that before you swapped the bumper.... Also behind the headlight theres a headlight alignment adjuster just below the level(one that looks like a ruler with water bubble in the middle)... And when you do adjust make sure that you match the height level on the headlight that way their evenly the same... I think the tool to you use is a proper allen key...
Old Mar 25, 2008 | 12:10 PM
  #6  
integra_101's Avatar
Member
 
Joined: Dec 2007
Posts: 832
From: GTA
Default

I have the same problem. Thx for helping up
Old Mar 31, 2008 | 11:53 AM
  #7  
integra_101's Avatar
Member
 
Joined: Dec 2007
Posts: 832
From: GTA
Default

Where do i put the allen key when im adjusting it? in that plastic lond piece???




All times are GMT -5. The time now is 11:59 PM.