Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   front end hopping/shaking during burnouts (https://www.torontointegras.ca/integra-technical-questions-tips-35/front-end-hopping-shaking-during-burnouts-12471/)

MaFiAbOy 11-15-2005 08:00 PM

front end hopping/shaking during burnouts
 
i have a '91 civic hb and i know that my c.v. axle on the drivers needs to be changed and that both upper control mounts need to be changes asap. But i just went in the rain and had some fun with my car and when i tried to spin the front tires, the front end was hopping. Do you think it is the c.v. cause it shakes when i do like 80km/h on the highway, but i let go of the gas and itdoesnt shake as much???

HKJ 11-15-2005 08:24 PM

so you know your cv boot is fucked, and both upper control arms are messed, yet you still do a burn out? smart.

the hopping is normal for fwd cars from what i understand.

MaFiAbOy 11-15-2005 08:31 PM


Originally Posted by HKJ
so you know your cv boot is fucked, and both upper control arms are messed, yet you still do a burn out? smart.

the hopping is normal for fwd cars from what i understand.

So why when my friends do it they dont shake or hop, WTF. I think cause it is the c.v. shaft.

and the "joyride" i just had was around my block a couple times

dc24me 11-15-2005 09:25 PM

how are your motor mounts?

MaFiAbOy 11-15-2005 09:52 PM


Originally Posted by dc24me
how are your motor mounts?

The front drivers side is looser then a downtown prostitutes -----. But its all good cause imma do the swap n e ways so i gotta change them.

b16a92teg 11-15-2005 10:04 PM

mafiaboy......you're a moron.....u dont deserve to be driving a car....
:headbang: :headbang: :headbang: :headbang:

FuzzyLS BRO 11-16-2005 12:08 AM

^hahahahhaa

Buff4Prez Yo 11-16-2005 01:45 AM

LOL don't do burnouts...plain and simple it's common for a FWD to do that. don't drive like an idiot. it doesn't make you cool

its me.. mario 11-16-2005 07:50 AM

^^

LIAR!! ALL CIVIC HATCHBACKS ARE COOLIO!!!!!! .................y0!!!

RRRex 11-16-2005 01:57 PM

Traction bars help. You can also try dropping your tire pressure. Might be loose bushings. Give the tire a few strong tugs and see if you can feel any play. But seriously, do your burnouts at the drag strip.

MaFiAbOy 11-16-2005 05:54 PM

Holy ----, My alignment teacher allowed me to take it in and inspect it and these are the things wrong:

The bushings in the front and rear are all loose,
the gear linkage is loose,
where the gear linkage meets up with the tranny, there is like a rubber boot, that is like kinda cracked and leaking
Both upper control mounts are ----
windshield washer tube that goes to my driver side "sprayer" is split and doesnt spray, leaks through engine compartment
rear passenger tire, a whole strip of thread is gone all the way around the wheel

Dave YO 11-17-2005 06:06 PM

awesome

PoST_PiMP 11-17-2005 06:23 PM

http://www.forumspile.com/Misc-Cluepon.jpg

JDMDJ 11-17-2005 06:23 PM

ok after all that...how much have you lowered your car?? if you've mickey moused ur suspension then ur gonna have tire hop becuse your shox arent traveling, so all your car can do is bounce, so stop cuttin coils and bindering out ur car lol do it right, and it'll feel right


All times are GMT -5. The time now is 11:10 PM.


© 2024 MH Sub I, LLC dba Internet Brands