Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Energy Bushings... (https://www.torontointegras.ca/integra-technical-questions-tips-35/energy-bushings-13088/)

MaFiAbOy 12-07-2005 10:48 PM

Energy Bushings...
 
Im planning to get them for my '91 civic. Are they good or what??

Platinum Playa 12-07-2005 11:01 PM

yeah

MaFiAbOy 12-08-2005 10:22 AM


Originally Posted by Platinum Playa
yeah


Yeah but do they last as long as the OEM bushings

engsr 12-08-2005 10:27 AM

No.

TwoSix 12-08-2005 10:28 AM

are those poly bushings? cause i her poly urethane bushings squeek a lot

Platinum Playa 12-08-2005 10:28 AM

some ppl say they dont, i hear the shock bushings starts to warp after a year. I'd get the front kit which doesn't come with the shock bushings and put those in. leave the shock bushings OEM.

Platinum Playa 12-08-2005 10:30 AM

make sure u put alot of grease on the bushings, the grease that they give u in the package is actually dielectric grease that tends to dry up fast, its utter crap. Buy some grease from crappy like marine grease which is water and salt resistant.

RRRex 12-08-2005 12:46 PM

Poly bushings are good. You'll notice more precise steering input and a more solid feel to the car. Unfortunately, they do not absorb as much strain, so they transfer more force onto the subframe and other bits. It's pretty minor actually on a street driven car and shouldn't stop you from buying them.

Solid bearing LCA bushings do exist and I have a set I haven't installed yet. Those do require subframe reinforcing since they absorb nothing - but on the plus side, you'll never have to change them - on a track -----, they need to be changed fairly often. As mentioned above, poly bushings do NOT last as long. Expect to change them once a year on a track -----, every 2 years or so on a street driven car.

OE is the most durable and reliable. Fresh OE bushings makd a big difference as well.

HKJ 12-08-2005 04:17 PM


Originally Posted by RRRex
Poly bushings are good. You'll notice more precise steering input and a more solid feel to the car. Unfortunately, they do not absorb as much strain, so they transfer more force onto the subframe and other bits. It's pretty minor actually on a street driven car and shouldn't stop you from buying them.

Solid bearing LCA bushings do exist and I have a set I haven't installed yet. Those do require subframe reinforcing since they absorb nothing - but on the plus side, you'll never have to change them - on a track -----, they need to be changed fairly often. As mentioned above, poly bushings do NOT last as long. Expect to change them once a year on a track -----, every 2 years or so on a street driven car.

OE is the most durable and reliable. Fresh OE bushings makd a big difference as well.

+1 for OEM bushings. i dont like durability issues that come with poly bushings, (and squeeking). OEM bushing may not give you that precise steering input, but i dont think you'd need it seeing as you drive your car on the street daily. i plan on autox'ing this spring, and i'm going to install OEM bushings rather then aftermarkets.

Platinum Playa 12-08-2005 04:28 PM

I have full ES bushing in the front of my car, been about 2 months now i believe and no squeeking issue, the steering is much much sharper then before. Once i do the rear and slap on this ITR tranny the LSD plus bushings are gonna feel amazing.


All times are GMT -5. The time now is 12:34 PM.


© 2024 MH Sub I, LLC dba Internet Brands