EK/EM/EG and DC
 

Ok guys, I know this topic has been somewhat beaten to death. But I might have my hands on a 2000 Civic Si, EM1 right? Are their parts interchangeable?

Currently I roll a 97 Integra GS and I have a set of koni yellows and H&R springs that if I could, I would swap over. The civic is beyond mint. One owner, my aunt who has it up-kept to the max.

I don't think there is anything else off my DC I would really want. Just the springs and shocks really.

Thanks in advance!

Re: EK/EM/EG and DC
 

I know Dc and EG parts are interchangeable...with the EM1 I think you gotta change the forks...if I'm not mistaken.

I know for a fact it isn't just a straight bolt up from the DC to the EM1

Re: EK/EM/EG and DC
 

Thats still not bad then, I can pull a set of forks from the yard then if need be I'm sure.

I was thinking about getting my Koni's re sealed and done but no nothing at all about that.

Re: EK/EM/EG and DC
 

Once again I'm not sure if it's the forks or not. I can't remember if it's the forks or not. Just double check or wait for someone who knows 100% what you need to change.

Re: EK/EM/EG and DC
 

It will swap over 100%. The only difference is rear strut. The opening in the bottom of the strut that goes over lca is slightly thinner on ek (96-00) civic, so what most manufacturers do is sell same eg/dc/ek struts for all, and include washers/spacers to take up that space up.

Front struts are identical and use the same forks.

Oh and em1 is sir if I recall correctly. Em2 was 01+, just to clarify.