b18b1 harness GRRRRRR
close
|
I found this link
unofficial B18B Swap Guide - finally! - Generation 2 Integra Club™ Forum Looks like i need to extend a part of my obd0 harness so the coolent sensors will function and i need a b18a1 oil sensor adapter and put it on the b1 This is what sumone on g2ic said " All you have to do is 1.) Remove OBD0 Injector clips, Splice on the obd1 injector clips ($5 for clips at Junkyard) 2.) Remove OBD0 Distributor clips, splice on the OBD1 Distributor clips ($5 for clips at Junkyard - Simply match the wire colors) 3.) Extend the cooling fan switch sensor wires 4.) Remove resistor box and splice the 4 red and one yellow wires together 5.) Cut off the one wire 02 sensor wire and tape it off 6.) Get a Boomslang/Rywire OBD1 Jumper harness ($110), use the subharness (Included) that comes with it to plug in your 4 wire 02 (Should come with motor) 7.) Plug in the new ecu. (P75/P74 - $50) " |
All times are GMT -5. The time now is 11:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands