Toronto Integras - Torontos Acura Integra Club

Toronto Integras - Torontos Acura Integra Club (https://www.torontointegras.ca/)
-   Integra Technical Questions and Tips (https://www.torontointegras.ca/integra-technical-questions-tips-35/)
-   -   Alignment Kits (https://www.torontointegras.ca/integra-technical-questions-tips-35/alignment-kits-24591/)

Solid GSR YO Mar 1, 2007 10:14 AM

Alignment Kits
 
I'm looking at alignment kits for my 93 teg, looking at different kits for the rear, i have the shims in now but what do you guys reccomend for an adjustable kit?? I've been looking at ST Suspensions because I will be getting their swaybars.

I should be lowered over 2.5" this year.

Frost YO[SMCR] Mar 1, 2007 12:10 PM

hmmmmmmm waiting for low bow fuzzy to chime in mistah loww rydah!

FuzzyLS BRO Mar 1, 2007 02:24 PM

well first off do you mean a camber kit? and if you want it so that you don't wear tires then there's no point in it, just take your car for an alignment and make sure your toe is in spec.

Solid GSR YO Mar 1, 2007 09:34 PM

lol woops yea a really good quality camber kit my bad, i don't want fuzzy style camber wear

FuzzyLS BRO Mar 1, 2007 11:08 PM

^i don't have camber wear. i have toe wear. camber does not wear tires.

slickkhan Mar 2, 2007 02:41 PM

^^^^ sure it does why do they sell camber kits then

Smartass pHO Mar 2, 2007 02:51 PM

Camber, toe, underinflation, overinflation all wear tires unevenly.

Do some reading, figure out what's causing your wear, then FIX IT! Or just buy new tires every 6 months.

FuzzyLS BRO Mar 2, 2007 04:15 PM

^i have, it's my incorrect toe. before i broke the balljoint (pre 4x114.3) i got an alignment and did not wear tires. camber kits help give proper contact of the tire to the ground, instead of running on the inside of the tire.

IntegratedGSR Mar 2, 2007 06:01 PM

Yup. I agree with Fuzzy. Incorrect TOE wears tires.
And he nailed it right on, camber kits are just for correct tire contact with the road.
Incorrect camber and incorrect caster cause the vehicle to pull either left or right.
Caster pulls to the most negative side.
and Camber pulls to the most positive side.


All times are GMT -5. The time now is 05:42 AM.


© 2026 MH Sub I, LLC dba Internet Brands