Integra Technical Questions and Tips Tech discussion for all things Acura Integra

Aftermarket Radio Install

Thread Tools
 
Search this Thread
 
Old Oct 29, 2009 | 12:20 AM
  #1  
Mugen's Avatar
Thread Starter
n00b
 
Joined: Oct 2009
Posts: 2
From: Scarborough
Default Aftermarket Radio Install

Hey everyone! So I'm obviously new on here and recently picked up a 96 LS coupe a few weeks ago and I'm going to swap out the factory tape deck with a Sony head unit. This is my third Honda so I'm pretty familiar with how things work and are set up. I've been searching the web to see if there is any easier way of removing the stock tape deck without having to remove the centre arm rest and shifter. I've even did a search on here and can't seem to find anything. Can anyone offer any advice or methods that they have used?

Thanks in advance.
Old Oct 29, 2009 | 06:01 AM
  #2  
Spike's Avatar
There's plenty to do outside my room but I choose not to!
iTrader: (5)
 
Joined: Apr 2009
Posts: 5,142
From: Burlington
Default

You don't need to remove any of that, the only thing you need to remove is the ash tray and the 2 screws that hold that in, and the radio and pocket will pop out out with a little bit of prying, as it's just clipped in on the side's.
Old Oct 29, 2009 | 08:06 AM
  #3  
KjB's Avatar
KjB
Junior Member
 
Joined: Feb 2009
Posts: 360
From: toronto
Default

well for my aftermarket install i didnt have to take anything out at all except for the headunit, but most likely like spike said if u just remove ur ash tray you should be fine, i guess i just got lucky
Old Oct 29, 2009 | 10:16 AM
  #4  
Neon_Dave's Avatar
Senior Member
iTrader: (1)
 
Joined: Aug 2009
Posts: 1,206
From: GTA
Default

Removing the ashtray will make it a lot easier to get some leverage in to pry the box out of it's place - many things in these cars are just removed by prying (carefully).
Old Oct 29, 2009 | 10:59 AM
  #5  
holung's Avatar
Junior Member
 
Joined: Mar 2009
Posts: 496
From: scarborough
Default

i just reached behind the deck down under the dash and unscrewed two screws and mine came out
Old Oct 29, 2009 | 12:08 PM
  #6  
Mugen's Avatar
Thread Starter
n00b
 
Joined: Oct 2009
Posts: 2
From: Scarborough
Default

Thanks guys. I'll try it that way and let you know how it goes.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Ryus
Integra Technical Questions and Tips
3
May 10, 2005 12:37 PM




All times are GMT -5. The time now is 09:24 AM.