96' Teg - Viper Almarm Problems/Disconnection
 

so basically i bought my integra over 3 years ago and everything was ok. after 2 years i lost my licence and had it sitting outside and in my garage..now when i went to start my car after a long while the alarm would make the clock and the gauges flick off and on making a tic toc sound. After mashing the alarm button it stopped and it still wouldnt start. So i started the car through the starter and boom she started perfect. Now my question is 1. Where do I start looking for the kill start and I also need to know the model so i can get the proper manual to get it out and trash it. Thanks and hope you guys can help

your starter wires will be somewhere in the steering coloumn area, just follow youre ignition wires, and there will be 3 wires spliced and 2 wires that are on the starter wire where they cut it. you will have to piece in a section for your starter wire. as for the rest of the system, to find it, take the trim panels off from under your steering wheel area, left kick panel, and a pillar trim. follow your alarm system wires that were connected to your ignition wires and that will tell you where the brain is. my guess is either left kick panel or in the center console area. then basicly follow the wires from the brain and remove, under the hood there will be a hood switch wire siren wire and maybe a positive and negative wire to the battery. make sure to electric tape everything disconnect your battery before you cut any wires.