Toronto Integras - Torontos Acura Integra Club - Super Moving SALE! Tools, parts,suspension, rims etc. **************************

Im moving to beautiful Victoria B.C. in early september. Im hoping too start a career there. I also checked into the "casc" type sanctioning body there and guess what... they have badass Hill Climbs up mountains that have rules similar to solo1 but are tarmac rally esque. So Im knida excited about racing through the mountains. I'm gonna do the 5000+km drive down there in my ITR. Im selling all my shop related goodies. Please feel free to reply with you opinions of livng out west etc.

ALL PARTS ARE LOCATED IN BRANTFORD, I CAN BE REACHED @ 705 252 1991 or email (freeltec@hotmail.com) dont pm me or reply in thread unless to bump!

Here goes:

http://photos-779.ll.facebook.com/ph...34091_7282.jpg
cherry picker $350

http://photos-779.ll.facebook.com/ph...34094_6956.jpg
mint Omni Coilovers 10k/12k $750

http://photos-779.ll.facebook.com/ph...34095_7561.jpg

http://photos-779.ll.facebook.com/ph...34096_7821.jpg

http://photos-779.ll.facebook.com/ph...34097_8069.jpg

http://photos-779.ll.facebook.com/ph...34093_6993.jpg
Mint JDM ITR Cams $300

http://photos-779.ll.facebook.com/ph...34110_2094.jpg

http://photos-779.ll.facebook.com/ph...34109_1803.jpg
CRV Rims with great winter tires Michlin X-Ice Buy Early and save. There is no winter in Victoria so I wont be needing these :)
$350

http://photos-779.ll.facebook.com/ph...34114_3133.jpg

http://photos-779.ll.facebook.com/ph...34111_2362.jpg

225/50/15 Toyo RA-1 Great shape, Lots of life left $250 if you take them off my rims. I paid a LOT for these brand new and they still have way more then half the meat on em.

http://photos-779.ll.facebook.com/ph...34115_3384.jpg
Prelude "blade" wheels with Hankook k104 tires. Tires have about 50percent tread left. The rims have been painted bronze. These wheels are perfect and have ZERO curbing. $250 with tires!

http://photos-779.ll.facebook.com/ph...34116_3633.jpg

http://photos-779.ll.facebook.com/ph...34117_3880.jpg

Sparco Red Harnesses (pair), Brand Spanking new, never used.
$90 each or 175 for the pair.

http://photos-779.ll.facebook.com/ph...34120_1168.jpg

http://photos-779.ll.facebook.com/ph...34119_4400.jpg

Greddy ProfecB (orignial version) with Remote switching button (a $100 option). This boost controller is highly sought after because of its ease of use and reliability. Its much better then the specII and many others, Realiable, tune on the fly boost. $300

http://photos-779.ll.facebook.com/ph...34121_4941.jpg

1990 Integra LS tranny. Was gonna use the tranny for the fifth gear on my ITR. The tranny works fine, but i have never ran it in a car myself. $250

http://photos-779.ll.facebook.com/ph...34124_5685.jpg
New ITR (obd1) oilpump $130 I bought this when i was rebuilding my ITR engine then last minute realised that i needed a crank censor for obd2, so i had to buy the obd2 one.

http://photos-779.ll.facebook.com/ph...34125_5937.jpg
Obd-0 B16a Dizzy $120 Mint shape ( i went obd1 on my EF)

http://photos-779.ll.facebook.com/ph...34126_6181.jpg
Mint Set of Tokikio Blues. They have less then 10k on them. $280
For 88-91 Ef civic CRX and DA INtegras

http://photos-779.ll.facebook.com/ph...34127_6433.jpg

3" intake piping. One is custom and the other was bought. $10 & $20 each

http://photos-779.ll.facebook.com/ph...34129_6925.jpg

DA LS integra Starter $50, EF civic Si Cam $20, EF headlight $30

http://photos-779.ll.facebook.com/ph...34130_7174.jpg
B16a1 Intake manifold $20, EG hatch spoiler $20

http://photos-779.ll.facebook.com/ph...34131_7421.jpg
ARC welder with all the extra accessories, goggles and sticks. Perfect beginner weleder. I used it to baffle oil pans, make brackets, mounts and even weld on quarter panels. $150

http://photos-779.ll.facebook.com/ph...34132_7670.jpg
Large Chop Saw, Like new. I only used it a few times to make charge piping on my turbo car. Works mint and I'll even Include a Extra Blade. $150

http://photos-779.ll.facebook.com/ph...34134_8185.jpg

B16a oilpan, perfect to use stock or baffle. $40

http://photos-779.ll.facebook.com/ph...34135_8428.jpg

Bench Grinder, works great. $20

http://photos-779.ll.facebook.com/ph...34222_1511.jpg

Real Autometer Monster 5" Tach with Shift Light, Black and clean looking
$150

http://photos-779.ll.facebook.com/ph...34223_1754.jpg

Vortech FMU 12:1 $60. Works great for homemade turbo fuel management.
B&M FPR, $ 35

http://photos-779.ll.facebook.com/ph...34226_2631.jpg

OBD 1 H22a ecu: $150
OBD 1 P06 ecu : $60 ( can be chipped to be p28 dohc vtec)
OBD 0 PR3 b16a1 ecu: $100

http://photos-779.ll.facebook.com/ph...34227_2864.jpg

2x10" Sub Box $50 takes it. Great shape and sound.

http://photos-779.ll.facebook.com/ph...34228_3102.jpg

1990 CRX hatch, Mint shape, no rust. $80

http://photos-779.ll.facebook.com/ph...34229_3338.jpg

ITR stock Intake box $50 (flows better then other stock intakes)

http://photos-779.ll.facebook.com/ph...34230_3571.jpg

1990 CRX DX seats $30 for the pair.